Specifications for this product appear below.
| Type | DIN rail mounting | |||
|---|---|---|---|---|
| General use | High-performance | Two sensor connection | ||
| Model No. | NPS-C7 | NPS-CT7 | NPS-C7W | |
| Applicable sensors | Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output | |||
| Supply voltage | 100 to 240 V AC ± 10 % | |||
| Power consumption | 6 VA or less | |||
| Power supply for sensor | Voltage | 12 V DC ± 10 % (incorporated with short-circuit protection) | ||
| Current | 150 mA | 130 mA | 120 mA | |
| Output | Relay contact 1c ・Switching capacity: 250 V 3 A AC (resistive load) ・Electrical life: 100,000 switching operations or more (rated load)(at 1,800 operations/hour) ・Mechanical life: 10 million switching operations or more (at 36,000 operations/hour) NPN open-collector transistor ・Maximum sink current: 100 mA or less ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
Relay contact 1c x2 ・Switching capacity: 250 V 3 A AC (resistive load) ・Electrical life: 100,000 switching operations or more (rated load)(at 1,800 operations/hour) ・Mechanical life: 10 million switching operations or more (at 36,000 operations/hour) |
||
| Output operation | Switchable normal operation or inverse operation | |||
| Response time | Relay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less | 10 ms approx. | ||
| Indicators | Power | Red LED (lights up when the power is ON) | ||
| Output (Note 2) | Red LED (lights up when the output is ON) | |||
| Sensor signal input | - | Red LED (lights up when the sensor signal input is effective) |
- | |
| External synchronization input |
- |
Red LED (lights up when the external synchronization input is effective) |
- | |
| External synchronization function | Gate trigger | Gate trigger and edge trigger | - | |
| Timer function | - | Three function selectable timer (Timer period: switchable either 40 ms to 1 sec. or 0.4 sec. to 10 sec.) |
- | |
| Ambient temperature | -10 to +50 °C +14 to +122 °F (No dew condensation or icing allowed), Storage: -30 to +70 °C -22 to +158 °F | |||
| Material | Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced) | |||
| Connecting method | Terminal block | |||
| Weight | Net weight: 160 g approx. | |||
| Accessories | Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc., Adjusting screwdriver: 1 pc. (NPS-CT7 only) | |||
| Dimensions | W80 x H80 x D32 mm W3.150 x H3.150 x D1.260 in | |||
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
2) In NPS-C7W, two output indicators, Sensor 1 output indicator and Sensor 2 output indicator, have been incorporated.
