- This is a legacy product. We recommend choosing one of our newer products in this category.
Dimensions/model drawings for this product appear below.
Units are usually notated in millimeters (mm).
(For some products, additional measurements may also be provided - notated as inches (in) or inches (in)).
SF2-EH□(-N)
Sensor
Assembly dimensions
Mounting drawing for the sensor on which the sensor mounting brackets and the intermediate supporting brackets are mounted
[Side mounting]
[Back mounting]
Note:
MS-SF2-2 (intermediate supporting bracket) is attached with sensors having 24, or more, beam channels.
The number of attached intermediate supporting brackets is different depending on the sensor as follows.
SF2-EH24(-N), SF2-EH28(-N), SF2-EH32(-N), SF2-EH36(-N), SF2-EH40(-N), SF2-EH48(-N), SF2-EH56(-N): 1 set
SF2-EH64(-N), SF2-EH72(-N), SF2-EH80(-N): 2 sets
MS-SF2-1
Sensor mounting bracket (Accessory)
Material:
Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Four bracket set
[Eight M4 (length 8mm) hexagon-socket-head bolts and eight spring washers are attached.]
MS-SF2-2
Intermediate supporting bracket (Accessory)
U-shaped intermediate supporting bracket
Material:
Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Set of 2 Nos. each of U-shaped intermediate supporting bracket and L-shaped intermediate supporting bracket
[Two M4 (length 6mm), two M4 (length 8mm) hexagon-socket-head bolts, two nuts and two spring washers are attached.]
L-shaped intermediate supporting bracket
Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
MC-SF2EH-□
Front protection bracket (Optional)
[Side mounting]
[Back mounting]
Note:
The intermediate supporting bracket for protection bar is an accessory for units with beam axis of 40 or above. Use it if there is a large amount of bending of the bar.
