Dimensions/model drawings for this product appear below.
Units are usually notated in millimeters (mm).
(For some products, additional measurements may also be provided - notated as inches (in) or inches (in)).
DP-10□
Sensor
DP-10□-M(-P)
Sensor
DP-11□-E-P-J
Sensor
CN-14A-C□ CN-14A-R-C□
Connector attached cable (Optical, CN-14A-C2 is attached to the sensor)
Length L
MS-DP1-1
Sensor mounting bracket (Optional)
Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M3 (length 6 mm 0.236 in) screws with washers are attached
Assembly dimensions
MS-DP1-5
Sensor mounting bracket (Optional)
Assembly dimensions
Mounting drawing with DP-10□-M
MS-DP1-2 MS-DP1-3
Panel mounting
Assembly dimensions
Mounting drawing with DP-101
Material:
POM (Panel mounting bracket)
Polycarbonate (Front protection cover)
Panel cut-out dimensions
When 1 unit is installed
Note:
The panel thickness should be 1 to 6 mm 0.039 to 0.236 in.
MS-DP1-4
Panel mounting bracket (Optional)
Assembly dimensions
Mounting drawing with DP-101
Material:
Panel mounting bracket body … Nylon 6
Panel mounting bracket … Stainless steel (SUS304)
Spacer … Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Panel cut-out dimensions
Note:
The panel thickness should be 1 to 3.2 mm 0.039 to 0.126 in.
MS-DP1-7
Conversion bushing (Optional)
Material: Brass (Nickel plated)
Weight: 10g approx.
MS-DP1-FM
Flat attachment (Optional)
Assembly dimensions
Mounting drawing with DP-10□-M
Material:
Enclosure ･･･ Polybutylene terephthalate (PBT)
(Glass fiber reinforced)
Pressure port ･･･ Stainless steel (SUS303)
O-ring ･･･ Hydrogenated Nitrile Butadiene Rubber (H-NBR)
Weight: 15g approx.(flat attachment only)
Two M3 (length 8mm 0.315 in) screws, two M4 (length 20mm 0.787 in screws are attached.
MS-DP1-FR MS-DP1-FE MS-DP1-FN
Flat attachment (Optional)
Assembly dimensions
Mounting drawing with DP-10□-M
Note:
MS-DP1-FR has a Rc1/8 female thread.
MS-DP1-FN has a NPT1/8 female thread.
Material:
Enclosure ･･･ Polybutylene terephthalate (PBT)
(Glass fiber reinforced)
Pressure port ･･･ Stainless steel (SUS303)
O-ring ･･･ Hydrogenated Nitrile Butadiene Rubber (H-NBR)
Weight: 25g approx. (flat attachment only)
Two M3 (length 8mm 0.315 in screws, two M4 (length 20mm 0.787 in screws are attached.
