Specifications for this product appear below.
| Type | Amplifier built-in, Pipe-mountable | |
|---|---|---|
| Model No. | EX-F1 | |
| Sensing object | Liquid (Note 2) | |
| Applicable pipe diameter | Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note 3) |
|
| Supply voltage / Current consumption | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less / 30 mA or less | |
| Output | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
|
| Utilization category | DC-12 or DC-13 | |
| Output operation | Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON) | |
| Short-circuit protection | Incorporated | |
| Response time | 2 ms or less | |
| Operation indicator | Red LED (lights up when the output is ON) | |
| Pollution degree | 3 (Industrial environment) | |
| Ambient temperature (Note 4) | -10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: -20 to +70 °C -4 to +158 °F | |
| Ambient humidity / Ambient illuminance | 35 to 85 % RH, Storage: 35 to 85 % RH / lncandescent light: 3,000 lx at the light-receiving face | |
| EMC | EN 60947-5-2 | |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each | |
| Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each | |
| Emitting element | Infrared LED (modulated) | |
| Material | Enclosure: Polycarbonate, Tying band: Nylon, Anti-slip tube: Silicone | |
| Cable | 0.1 mm2 3-core cabtyre cable, 1 m 3.281 ft long | |
| Cable extension | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. | |
| Weight | Net weight: 15 g approx., Gross weight: 60 g approx. | |
| Accessories | Tying band: 2 pcs., Anti-slip tube: 2 pcs. | |
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
2) Unclear or highly viscous liquid may not be detected stably.
3) Do not use the sensor with pipes other than the above specified.
4) Liquid being detected should also be kept within the rated ambient temperature range.
