- This is a legacy product. We recommend choosing one of our newer products in this category.
Specifications for this product appear below.
| Type | Diffused beam type | Spot-beam type | |||
|---|---|---|---|---|---|
| Long sensing range | With timer | ||||
| Model No. | EX-42 | EX-44 | EX-43 | EX-43T | |
| Sensing range | 5 to 38 mm 0.197 to 1.496 in (Conv. point: 20 mm 0.787 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) |
10 to 70 mm 0.394 to 2.756 in (Conv. point: 40 mm 1.575 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) |
20 to 35 mm 0.787 to 1.378 in (Conv. point: 30 mm 1.181 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) |
||
| Min. sensing object | ø0.2 mm ø0.008 in copper wire (Setting distance: 20 mm 0.787 in) |
ø0.2 mm ø0.008 in copper wire (Setting distance: 40 mm 1.575 in) |
ø0.03 mm ø0.001 in gold wire (Setting distance: 30 mm 1.181 in) | ||
| Hysteresis | 15 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | |||
| Repeatability (perpendicular to sensing axis) |
0.1 mm 0.004 in or less (Setting distance: 20 mm 0.787 in) |
0.2 mm 0.008 in or less (Setting distance: 40 mm 1.575 in) |
0.05 mm 0.002 in or less (Setting distance: 30 mm 1.181 in) | ||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | ||||
| Current consumption | 35 mA or less | ||||
| Output | NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
||||
| Utilization category | DC-12 or DC-13 | ||||
| Output operation | Light-ON | ||||
| Short-circuit protection | Incorporated | ||||
| Response time | 0.5 ms or less | ||||
| Operation indicator | Red LED (lights up when the output is ON) | ||||
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
||||
| Sensitivity adjuster | - | Continuously variable adjuster | - | ||
| Timer function | - | Variable OFF-delay timer (0.1 to 1 sec. approx.) (Note 2) |
|||
| Pollution degree | 3 (Industrial environment) | ||||
| Protection | IP67 (IEC) | ||||
| Ambient temperature | -25 to +55 °C -13 to +131 °F (No dew condensation or icing allowed), Storage: -30 to +70 °C -22 to +158 °F |
||||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||||
| Ambient illuminance | Incandescent light: 3,000 lx at the light-receiving face | ||||
| EMC | EN 60947-5-2 | ||||
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||||
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | ||||
| Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in amplitude (20 G max.) in X, Y and Z directions for two hours each | ||||
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each | ||||
| Emitting element | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated) | |||
| Material | Polyalylate | ||||
| Cable | 0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long | ||||
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | ||||
| Weight | Net weight: 45 g approx., Gross weight: 70 g approx. | ||||
| Accessory | - | Adjusting screwdriver: 1 pc. | |||
Notes:
1) Where measurement conditions heve not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F Universal sensor mounting stand.
2) The timer is always effective.
