Dimensions/model drawings for this product appear below.
Units are usually notated in millimeters (mm).
(For some products, additional measurements may also be provided - notated as inches (in) or inches (in)).
EX-21□
Sensor
Note:
Not incorporated on the emitter.
EX-23□
Sensor
Notes:
1) Not incorporated on the emitter.
2) It is the sensitivity adjuster on the emitter.
EX-29□ EX-22□ EX-26□ EX-28□
Sensor
EX-24□
Sensor
RF-200
Reflector (Accessory for the retroreflective type sensor)
Material:
Acrylic (Reflector)
ABS (Base)
RF-210
Reflector (Optional)
Material:
Acrylic (Reflector) ABS (Base)
Two M3 (length 8 mm 0.315 in) screws with washers and two nuts are attached.
RF-11
Reflective tape (Optional)
Material:
Acrylic
RF-12
Reflective tape (Optional)
Material:
Acrylic
MS-RF21-1
Reflector mounting bracket for RF-210 (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
Assembly dimensions
MS-EX20-1
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304) Two M3 (length 5 mm 0.197 in) pan head screws
[stainless steel (SUS304)] are attached.
Assembly dimensions
Mounting drawing with EX-21□
MS-EX20-2
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 14 mm 0.551 in) screws with washers [stainless steel (SUS304)] are attached.
Assembly dimensions
Mounting drawing with the receiver of EX-23□
MS-EX20-3
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 5 mm 0.197 in) pan head screws [stainless steel (SUS304)] are attached.
Assembly dimensions
Mounting drawing with the receiver of EX-21□
MS-EX20-4
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 14 mm 0.551 in) screws with washers [stainless steel (SUS304)] are attached.
Assembly dimensions
Mounting drawing with the receiver of EX-23□
MS-EX20-5
Universal sensor mounting bracket (Optional)
Material:
Die-cast zinc alloy
Two M3 (length 12 mm 0.472 in) screws with washers [stainless steel (SUS304)], one M3 (length 10 mm 0.394 in) hexagon socket-head bolt [stainless steel (SUS304)], and one M3 hexagon nut [stainless steel (SUS304)] are attached.
Assembly dimensions
Mounting drawing with the receiver of EX-23□
Note: This is the adjustable range of the movable part.
MS-EX20-FS
Mounting spacer (Optional)
Material:
Polycarbonate
Assembly dimensions
Mounting drawing with the receiver of EX-21□
