Dimensions/model drawings for this product appear below.
Units are usually notated in millimeters (mm).
(For some products, additional measurements may also be provided - notated as inches (in) or inches (in)).
CX-41□
Sensor
Notes:
1) Not incorporated on the emitter and the basic type sensor.
2) It is the power indicator (green) on the emitter.
3) Not incorporated on the emitter.
4) Basic type: 0.5 m 1.640 ft long.
CX-41□-Z
Sensor
Notes:
1) Not incorporated on the emitter.
2) It is the power indicator (green) on the emitter.
CX-41□-J
Sensor
Notes:
1) Not incorporated on the emitter.
2) It is the power indicator (green) on the emitter.
CX-49□ CX-48□ CX-42□
Sensor
Notes:
1) Not incorporated on the Bacic type sensors.
2) Basic type: 0.5 m 1.640 ft long.
CX-49□-Z CX-48□-Z CX-42□-Z
Sensor
CX-49□-J CX-48□-J CX-42□-J
Sensor
CX-44□
Sensor
CX-44□-Z
Sensor
RF-230
Reflector (Accessory for the retroreflective type sensor)
Material:
Acrylic (Reflector)
ABS (Base)
RF-220
Reflector (Optional)
Material:
Acrylic (Reflector)
ABS (Base)
RF-210
Reflector (Optional)
Material:
Acrylic (Reflector)
ABS (Base)
Two M3 (length 8 mm 0.315 in)
screws with washers and two nuts are attached.
RF-11
Reflective tape (Optional)
Material:
Acrylic
RF-12
Reflective tape (Optional)
Material:
Acrylic
RF-13
Reflective tape (Optional)
MS-CX2-1
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with the receiver of CX-41□
MS-CX2-2
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with the receiver of CX-41□
MS-CX2-4
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 14 mm 0.551 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with the receiver of CX-41□
MS-CX2-5
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with the receiver of CX-41□
MS-CX-3
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with the receiver of CX-41□
MS-RF21-1
Reflector mounting bracket for RF-210 (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
Assembly dimensions
MS-RF22
Reflector mounting bracket for RF-220 (Optional)
Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M3 (length 8 mm 0.315 in) screws with washers are attached.
Assembly dimensions
MS-RF23
Reflector mounting bracket for RF-230 (Optional)
Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M4 (length 10 mm 0.394 in) screws with washers are attached.
Assembly dimensions
