- This is a legacy product. Check out our new line of Tough Fibers for replacements.
Dimensions/model drawings for this product appear below.
Units are usually notated in millimeters (mm).
(For some products, additional measurements may also be provided - notated as inches (in) or inches (in)).
FR-KV1
Retroreflective type・Free-cut
FR-KZ21
Retroreflective type・Free-cut
Fiber
Mounting drawing with the attached mounting bracket (MS-FD-2)
Reflector / RF-003 (Accessory for FR-KZ21)
FR-KZ21E
Retroreflective type・Free-cut
Fiber
Mounting drawing with the attached mounting bracket (MS-FD-2)
Reflector / RF-003 (Accessory for FR-KZ21E)
FR-WKZ11
Retroreflective type・Free-cut
Fiber
Mounting drawing with the fiber mounting bracket (MS-FD-2)
Reflective tape / RF-13 (Accessory for FR-WKZ11)
FB-1
Fiber bender (Optional)
Material:
PP (Containing steel blade)
FTP-□ FDP-□
Protective tube (Optional)
FTP-□, FDP-N□
FTP-N□
FDP-□
・Length L
FV-BR1
Photo-terminal (for vacuum-resistant fiber) (Optional)
FV-LE1
Vacuum resistant expansion lens (Optional)
Material:
Enclosure Aluminum alloy (A6061-T6)
Lens:BK-7
FV-SV2
Vacuum resistant side-view lens (Optional)
FX-AT2
Attachment for fixed-length fiber (Accessory for fixed-length fiber)
Material:
POM
FX-AT3
Attachment for ø2.2 mm ø0.087 in fiber (Accessory for ø2.2 mm ø0.087 in fiber)
Material:
Polycabonate
FX-AT4
Attachment for ø1 mm ø0.039 in fiber (Accessory for ø1 mm ø0.039 in fiber)
Material:
Holder・・・PA (Nylon 66)
Ground・・・POM
FX-AT5
Attachment for ø1.3 mm ø0.051 in fiber (Accessory for ø1.3 mm ø0.051 in fiber)
Material:
Holder・・・PA (Nylon 66)
Ground・・・POM
FX-AT6
Attachment for ø1 mm ø0.039 in / ø1.3 mm ø0.051 in mixed fiber (Accessory for ø1 mm ø0.039 in / ø1.3 mm ø0.051 in mixed fiber)
Material:
Holder ・・・PA (Nylon 66)
Ground ・・・POM
FX-CT2
Fiber cutter (Accessory for free-cut type fiber)
Material:
ABS
FX-LE1
Expansion lens (Optinal)
Material:
Enclosure ・・・Brass (Nickel plated)
Lens ・・・Glass
FX-LE2
Super-expansion lens (Optional)
Material:
Enclosure・・・Stainless steel (SUS303)
Lens・・・Glass
FX-MR1
Pinpoint spot lens (Optional)
Material:
Enclosure・・・Aluminum (Black ALMITE)
Lens・・・Glass
Note:
In order to obtain a ø0.5 mm ø0.02 in spot, it is necessary to keep "l", in the above figure, within the specified range.
FX-MR2
Zoom lens (Optional)
Material:
Enclosure・・・Aluminum (Black ALMITE)
Lens・・・Glass
FX-MR3
Finest spot lens (Optional)
Material:
Enclosure・・・Aluminum (Black ALMITE)
Lens・・・Glass
Notes:
1) In order to obtain a ø0.3 mm ø0.012 in spot, it is necessary for "l", in the above figure, to be 28.5 mm 1.122 in.
2) When inserting the fiber, insert fully till it stops.
FX-MR5
Zoom lens (Optional)
Material:
Enclosure・・・PBT (Black)
Lens・・・Glass
NT-FX-MR5 (exclusive nut) is attached.
FX-MR6
Finest spot lens (Optional)
Material:
Enclosure・・・Aluminum (Black ALMITE)
Lens・・・Acrylic
Notes:
1) In order to obtain a ø0.1 mm ø0.004 in spot, it is necessary for "l", in the above figure, to be 29.5 mm 1.161 in.
2) When inserting the fiber, insert fully till it stops.
FX-SV1
Side-view lens (Optional)
Material:
Enclosure・・・Brass (Nickel plated)
Lens・・・Glass
MS-EX-3
Mounting bracket for FX-MR2 (Accessory for FX-MR2)
Material:
Brass (Nickel plated)
MS-FD-2
Fiber mounting bracket (Accessory for FD-WKZ1, FR-WKZ11, FD-H30-KZ1V-S)
Material:
Stainless steel (SUS)
RF-003
Reflector for FR-KZ21/KZ21E (Accessory for FR-KZ21/KZ21E)
RF-210
Reflector (Optional)
Material:
Acrylic (Reflector)
ABS (Base)
Two M3 (length 8 mm 0.315 in) screws with washers and two nuts are attached.
RF-220
Reflector (Optional)
Material:
Acrylic (Reflector)
ABS (Base)
RF-230
Reflector (Optional)
Material:
Acrylic (Reflector)
ABS (Base)
