Area Sensors: NA2-N Dimensions

Dimensions/model drawings for this product appear below.

Units are usually notated in millimeters (mm).
(For some products, additional measurements may also be provided - notated as inches (in) or inches (in)).

Download NA2-N product catalog in PDF format for more in-depth information

NA2-N□ NA2-N□-PN

Sensor

Emitter

Note:
Located on the right side in case of NA2-N8(-PN).

Receiver

^ Back to top

MS-NA1-1

Sensor mounting bracket (Optional)

Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Four bracket set
[Eight M4 (length 18 mm 0.709 in) screws with washers (Four screws with washers are used), eight nuts, four hooks, and four M4 (length 15 mm 0.591 in) screws with washers are attached.
M4 (length 15 mm 0.591 in) screws with washers are not used for NA2-N series.]

Assembly dimensions

Mounting drawing with the receiver

^ Back to top

MS-NA2-1

Sensor mounting bracket (Optional)

Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
[Eight M4 (length 18 mm 0.709 in) screws with washers (Four screws with washers are used), eight nuts, four hooks, four spacers, and four M4 (length 15 mm 0.591 in) screws with washers are attached.
M4 (length 15 mm 0.591 in) screws with washers are not used for NA2-N series.]

Assembly dimensions

Mounting drawing with the receiver

^ Back to top

MS-NA3-N□

Sensor supporting bracket (Optional)

Material:
Aluminum (Black ALMITE)
Two bracket set

Note:
The sensor supporting bracket can be used for both the emitter and the receiver.

Assembly dimensions

Mounting drawing with the receiver

^ Back to top