Dimensions/model drawings for this product appear below.
Units are usually notated in millimeters (mm).
(For some products, additional measurements may also be provided - notated as inches (in) or inches (in)).
NA1-PK3 NA1-PK3-PN
Sensor
Emitter
MS-NA3-3
Sensor protection bracket (Optional)
Material:
Cold rolled carbon steel (SPCC) (Black chromate)
Two bracket set
[Four M4 (length 15 mm 0.591 in) screws with washers and four nuts are attached.]
Note:
The sensor protection bracket can be used for both the emitter and the receiver.
