Dimensions/model drawings for this product appear below.
Units are usually notated in millimeters (mm).
(For some products, additional measurements may also be provided - notated as inches (in) or inches (in)).
NA1-PK5(-PN) NA1-5(-PN)
Sensor
MS-NA1-1
Sensor mounting bracket (Optional)
Material:
Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Four bracket set
[Four M4 (length 15 mm 0.591 in) screws with washers, eight nuts, four hooks and eight
M4 (length 18 mm 0.709 in) screws with washers are attached.
[M4 (length 18 mm 0.709 in) screws with washers are not used for NA1-PK5/5 series.]]
Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Four bracket set
[Four M4 (length 15 mm 0.591 in) screws with washers, eight nuts, four hooks and eight
M4 (length 18 mm 0.709 in) screws with washers are attached.
[M4 (length 18 mm 0.709 in) screws with washers are not used for NA1-PK5/5 series.]]
Assembly dimensions
Mounting drawing with the receiver
MS-NA2-1
Sensor mounting bracket (Optional)
Material:
Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Four bracket set
[Four M4 (length 15 mm 0.591 in) screws with washers, eight nuts, four hooks, four spacers and eight M4 (length 18 mm 0.709 in) screws with washers are attached.]
Four bracket set
[Four M4 (length 15 mm 0.591 in) screws with washers, eight nuts, four hooks, four spacers and eight M4 (length 18 mm 0.709 in) screws with washers are attached.]
Assembly dimensions
Mounting drawing with the receiver
MS-NA3 MS-NA3-BK
Sensor protection bracket (Optional)
Material:
Cold rolled carbon steel (SPCC) (MS-NA3: Chrome plated, MS-NA3-BK: Black chromate)
[Four M4 (length 15 mm 0.591 in) screws with washers, and four nuts are attached.]
SL-N15
S-LINK direct hook-up area sensor
