Dimensions/model drawings for this product appear below.
Units are usually notated in millimeters (mm).
(For some products, additional measurements may also be provided - notated as inches (in) or inches (in)).
NA1-11 NA1-11-PN
MS-NA1-1
Sensor mounting bracket (Optional)
Material:
Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Four bracket set
[Four M4 (length 15 mm 0.591 in) screws with washers, eight nuts, four hooks and eight M4 (length 18 mm 0.709 in) screws with washers are attached.
M4 (length 18 mm 0.709 in) screws with washers are not used for NA1-11.]
Assembly dimensions
Mounting drawing with the receiver
MS-NA2-1
Sensor mounting bracket (Optional)
Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Four bracket set
[Four M4 (length 15 mm 0.591 in) screws with washers, eight nuts, four hooks, four spacers and eight M4 (length 18 mm 0.709 in) screws with washers are attached.]
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Four bracket set
[Four M4 (length 15 mm 0.591 in) screws with washers, eight nuts, four hooks, four spacers and eight M4 (length 18 mm 0.709 in) screws with washers are attached.]
Assembly dimensions
Mounting drawing with the receiver
