- This product has been discontinued.
- This is a legacy product. We recommend choosing one of our newer products in this category.
Specifications for this product appear below.
General specifications
| Set model No. | LP-F10R-A |
|---|---|
| Work distance (Note 1) | 180 mm 7.087 in |
| Scanning method | Galvano-scanning method |
| Marking laser | Fiber-laser class 4 (Laser oscillator output: Average 10 W ・Max. 15 W, Peak emission wavelength: 1.06 µm 0.042 mil) |
| Range to be marked | 90 x 90 mm 3.543 x 3.543 in |
| Basic dimensions of characters | Height and width: 0.2 to 90 mm 0.008 to 3.543 in, Interval / position of marked characters: settable at 0.01 mm 0.0004 in interval |
| Scanning speed | 3,000 mm/sec. max. |
| Array of characters | Straight line, Straight-line proportional, obliquely straight line, obliquely straight line proportional, fan-like |
| Marking condition | Stationary |
| Types of characters | English capital and small characters, figures, hiragana, katakana, symbols, kanji (JIS first level), user-defined characters (up to 50 types) |
| Cooling method | Head: Natural air-cooling, Controller: Forced-air cooling |
| Supply voltage | 90 to 132 V AC or 180 to 264 V AC (auto-changing) 50 / 60 Hz |
| Power consumption (Note 2) | 430 VA or less at 100 V AC , 500 VA or less at 200 V AC |
| Input | Marking trigger, alarm reset, emergency stop, shutter control, laser excitation, interlock, file No., file confirmation, counter reset |
| Output | Power supply (12 V), alarm, during marking, ready for marking, end of marking, remote, warning, file confirmation, counter end |
| Installation direction | Horizontal / vertical (both head and controller) |
| Functions | ・ Marking image display ・ Work image display ・ Image screen enlargement ・ Origin offset ・ Help display ・ Memory capacity display ・ Step and repeat ・ Counter marking ・ Current date marking ・ Expiry date marking ・ Lot marking ・ Rank marking (Note 3) ・ Offset marking (Note 3) ・ Font selection ・ Intersection point compensation ・ Uniform marking ・ Spline compensation ・ Proportional ・ Bold character marking ・ Marking order optimized ・ Automatic shutter ・ Marking point display (guide laser) ・ Operating condition marking ・ CAD marking ・ Real-time display ・ Console auto-off ・ Power / speed setting for each row ・ On-line fine adjustment ・ Operator adjustment ・ VGA mouse connector equipment ・ Password protection ・ Double trigger sensing ・ Laser error sensing |
| Emergency stop switch | Incorporated (on both, head and controller) |
| Ambient temperature | 0 to + 40 °C + 32 to + 104 °F (No dew condensation allowed), Storage: - 10 t + 50 °C + 14 to + 122°F |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Net weight | Head: 5 kg approx., Controller: 20 kg approx. |
Notes:
1) The work distance has an individual error of ±0.3 mm ±0.012 in from product to product.
2) When the power is switched on, since a rush current of approximately 40 A (peak value) flows, take care if a short-circuit breaker, etc., is used.
3) It is optional.
