- This product has been discontinued.
- This is a legacy product. We recommend choosing one of our newer products in this category.
Laser marking on metals and coloring on resins
Panasonic is pleased to introduce a revolutionary new laser marker system, the LP-F10 series. It's the world's first laser marker to use 100% air-cooled pulse type fiber laser technology, developed from the telecommunications industry.
- Compact marking head with omni-directional capability
- Convenient marking of metals and resins with high contrast human readable characters and logos, and machine readable barcodes
- 100% air-cooled, no internal/external cooling water is required
- Rated for 100,000 hours of marking time before service is required
- Runs on a standard 120VAC wall outlet
Marking onto metals and coloring onto resins now a reality
Our "FAYb" oscillation system, that excites a laser beam within the fiber, amplifies and oscillates a pulse, marking onto metals and coloring onto resins, processes that until now were only possible using a YAG laser marker, have been realized. 
Small size, and a long life
The LP-F10 is equipped with a long-life LD, the same used for submarine cables. Its compact design aloows for vertical and horizontal positioning of the head and controller. System design and costs associated with installation can be minimized, because cooler piping is not necessary.
Energy saving design
Utilizing fiber optic amplification technology to amplify the beam signal, we have realized a high level of efficiency never before seen in conventional models. Our energy saving design enables one-third the power consumption compared to the LD-YAG laser marker in the same class.
Important safety features
Important safety features include an emergency stop switch, and an interlock input, which will not allow the laser to be emitted if the print start button is pressed by mistake.
Optional LCD console for ease-of-use [LP-ADP40]
Marking and configuration settings are immediately visible with our crisp and clear LCD screen. Or, you can use a standard monitor and mouse when using the relevant connectors on the laser marker.
Low-maintenance design
Dustproof structure: Because the head’s structure does not have an oscillating part, work associated with opening and closing the unit to replace the LD and the lamp is unnecessary.
Maintenance-free alignment: Optic mirrors are not used in the oscillation system, which eliminates beam axis misalignment. Alignment is also not required when moving or installing the unit.
