SF2B Safety Light Curtains Dimensions
Dimensions/model drawings for this product appear below. Units are usually notated in millimeters (mm) and in inches (in) (if provided).
SF2B-□ SF2B-□SL
Light curtain, Sub-sensor for series connection only
Assembly dimensions
Mounting drawing for the light curtain on which the standard mounting brackets MS-SF2B-1 (optional) and the intermediate supporting brackets MS-SF2B-2 are mounted.
[Back mounting]
[Side mounting]
Notes:
1) The MS-SF2B-2 intermediate supporting bracket is provided as an accessory with this product. The number of accessories provided varies depending on the product.
2) An end cap (connector for series connection) is not provided for the SF2B-H8(SL)(-□) and SF2B-A4(SL)(-□).
Note:
The distance between the tip of the light curtain and the last beam axis of the SF2B-H8(SL)(-□) and SF2B-A4(SL)(-□) is 22 mm 0.866 in.
SF2B-□ SF2B-□SL
Light curtain, Sub-sensor for series connection only
Assembly dimensions
Mounting drawing for the light curtain on which the dead zoneless mounting brackets MS-SF2B-3 (optional) and the intermediate supporting brackets MS-SF2B-2 are mounted.
[Back mounting]
[Side mounting]
Notes:
1) The MS-SF2B-2 intermediate supporting bracket is provided as an accessory with this product. The number of accessories provided varies depending on the product.
2) An end cap (connector for series connection) is not provided for the SF2B-H8(SL)(-□) and SF2B-A4(SL)(-□).
Note:
The distance between the tip of the light curtain and the last beam axis of the SF2B-H8(SL)(-□) and SF2B-A4(SL)(-□) is 22 mm 0.866 in.
MS-SF2B-1
Standard mounting bracket (Optional)
MS-SF2B-1(R)
[Back mounting]
[Side mounting]
MS-SF2B-1(L)
[Back mounting]
[Side mounting]
Material:
Stainless steel (SUS304)
Four brackets (R type x 2 and L type x 2) per set.
[M3 (length 5 mm 0.197 in) hexagonsocket-head bolts (eight bolts for light curtain mounting, eight bolts for beam axis alignment) are attached.]
MS-SF2B-2
Intermediate supporting bracket (Accessory for light curtain)
[Back mounting]
[Side mounting]
[For main unit mounting]
Material:
Stainless steel (SUS304)
Two main unit mounting brackets per set (for rear mounting and side mounting) (Note)
Note:
The intermediate supporting bracket MS-SF2B-2 is enclosed with the following products. The quantity differs depending on the product as shown below:
1 set:
SF2B-H□ ・・・ Light curtain with 40 to 56 beam channels
SF2B-A□ ・・・ Light curtain with 20 to 28 beam channels
2 sets:
SF2B-H□ ・・・ Light curtain with 64 to 80 beam channels
SF2B-A□ ・・・ Light curtain with 32 to 40 beam channels
3 sets:
SF2B-H□ ・・・ Light curtain with 88 to 96 beam channels
SF2B-A□ ・・・ Light curtain with 44 to 48 beam channels
MS-SF2B-3
Dead zoneless mounting bracket (Optional)
Main body
Material:
Stainless steel (SUS304) / Die-cast zinc alloy Four bracket set
Spacer for intermediate supporting bracket (Accessory for MS-SF2B-3)
The spacer for intermediate supporting bracket MS-SF2B-2 can be used as a spacer for eliminating the dead zone when mounting the light curtain laterally.
Material:
Stainless steel (SUS304)
Six brackets set
[Twelve M5 (length 8 mm 0.315 in) hexagon-socket-head bolts are attached.]
L-shaped mounting
Mounting adjustment range
The adjustment range of the light curtain angle is up to ±10 degrees.
MS-SF2B-4
Adapter mounting bracket for SF1-N / NA40 (Optional)
Material:
Stainless steel (SUS304)
Four bracket set
[Eight M3 (length 5 mm 0.197 in) hexagon-socket-head bolts are attached.]
MS-SF2B-5
Adapter mounting bracket for SF2-A / SF2-N (Optional)
MS-SF2B-5(R)
[Back mounting]
[Side mounting]
MS-SF2B-5(L)
[Back mounting]
[Side mounting]
Material:
Stainless steel (SUS304)
Four brackets (R type x 2 and L type x 2) per set
[M3 (length 5 mm 0.197 in) hexagon-socket-head bolts (eight bolts for light curtain mounting, eight bolts for beam axis alignment) are attached.]
MS-SF2B-6
Adapter mounting bracket for NA40 (Optional)
MS-SF2B-6(R)
MS-SF2B-6(L)
Material:
Stainless steel (SUS304)
Four brackets (R type x 2 and L type x 2) per set
[Eight M3 (length 5 mm 0.197 in) hexagon-socket-head bolts are attached.]
MS-SF2B-7
Adapter bracket for SF1-N (Optional)
[For upper-right surface mounting]
[For upper-left surface mounting]
[For lower-right surface mounting]
[For lower-left surface mounting]
Material:
Stainless steel (SUS304)
Four brackets (one of each type) per set
[Eight M3 (length 5 mm 0.197 in) hexagon-socket-head bolts are attached.]
SF2B-CCB□
Bottom cap cable (Optional)
SF2B-CB□(-A/B)
Bottom cap cable (Optional)
SFB-CC3 SFB-CC10
Extension cable (Optional)
SFB-CCJ10E SFB-CCJ10D
Extension cable (Optional)
SF2B-CSL01 SF2B-CSL05
Cable for series connection (Optional)
SF-LAT-2B
Laser alignment tool (Optional)
SF-IND-2
Large display unit for light curtain (Optional)
Material:
Bracket : Cold rolled carbon steel (SPCC)(Black chromate)
Enclosure : POM
Cover : Polycarbonate
RF-SFBH-□
Corner mirror (Optional)
