SF2-EH Safety Light Curtains Dimensions

• 
• 
• 
• 

• Overview
• Part Numbers
• Specifications
• Dimensions

Dimensions/model drawings for this product appear below. Units are usually notated in millimeters (mm) and in inches (in) (if provided).

• Download SF2-EH series dimensions in PDF format.
• Find 2D/3D CAD drawings and more for SF2-EH series.

SF2-EH□(-N)

Sensor

Assembly dimensions
Mounting drawing for the sensor on which the sensor mounting brackets and the intermediate supporting brackets are mounted

[Side mounting]

[Back mounting]

Note:
MS-SF2-2 (intermediate supporting bracket) is attached with sensors having 24, or more, beam channels.
The number of attached intermediate supporting brackets is different depending on the sensor as follows.
SF2-EH24(-N), SF2-EH28(-N), SF2-EH32(-N), SF2-EH36(-N), SF2-EH40(-N), SF2-EH48(-N), SF2-EH56(-N): 1 set
SF2-EH64(-N), SF2-EH72(-N), SF2-EH80(-N): 2 sets

^ Back to top

MS-SF2-1

Sensor mounting bracket (Accessory)

Material:
Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Four bracket set
[Eight M4 (length 8mm) hexagon-socket-head bolts and eight spring washers are attached.]

^ Back to top

MS-SF2-2

Intermediate supporting bracket (Accessory)

U-shaped intermediate supporting bracket

Material:
Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Set of 2 Nos. each of U-shaped intermediate supporting bracket and L-shaped intermediate supporting bracket
[Two M4 (length 6mm), two M4 (length 8mm) hexagon-socket-head bolts, two nuts and two spring washers are attached.]

L-shaped intermediate supporting bracket

Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)

^ Back to top

MC-SF2EH-□

Front protection bracket (Optional)

[Side mounting]

[Back mounting]

Note:
The intermediate supporting bracket for protection bar is an accessory for units with beam axis of 40 or above. Use it if there is a large amount of bending of the bar.

^ Back to top