PM2 Photoelectric Sensors Specifications
Specifications for this product appear below.
| Type | Connector type | |||
|---|---|---|---|---|
| Top sensing | Front sensing | L type (Top sensing) | ||
| Model No. | Light-ON | PM2-LH10 | PM2-LF10 | PM2-LL10 |
| Dark-ON | PM2-LH10B | PM2-LF10B | PM2-LL10B | |
| Sensing range | 2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 x 15 mm 0.591 in x 0.591 in) (Note 2) | |||
| Min. sensing object | ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in) | |||
| Hysteresis | 20 % or less of operation distance with white non-glossy paper (15 x 15 mm 0.591 x 0.591 in) |
|||
| Repeatability (perpendicular to sensing axis) |
0.08 mm 0.003 in or less (Note 3) | |||
| Supply voltage | 5 to 24 V DC ± 10 % Ripple P-P 5 % or less | |||
| Current consumption | Average: 25 mA or less, Peak: 80 mA or less | |||
| Output | NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
|||
| Utilization category | DC-12 or DC-13 | |||
| Overcurrent protection | Incorporated | |||
| Response time | 0.8 ms or less | |||
| Operation indicator | Red LED (lights up when the output is ON) | |||
| Pollution degree | 3 (Industrial environment) | |||
| Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +80 ℃ -13 to +176 ℉ |
|||
| Ambient humidity | 45 to 85 % RH, Storage: 45 to 85 % RH | |||
| Ambient illuminance | Incandescent light: 3,500 lx at the light-receiving face | |||
| EMC | EN 60947-5 | |||
| Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each | |||
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each | |||
| Emitting element | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | |||
| Material | Enclosure: Polycarbonate, Terminal part: HSM (Ag plated) | |||
| Cable | - | |||
| Cable length | Total length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 μF must be connected between +V and 0 V terminals.) |
|||
| Weight | Net weight: 4.5 g approx. Gross weight: 85 g approx. (10 piece package) |
Net weight: 4 g approx. Gross weight: 80 g approx. (10 piece package) |
||
| Type | Cable type | |||
|---|---|---|---|---|
| Top sensing | Front sensing | L type (Top sensing) | ||
| Model No. | Light-ON | PM2-LH10-C1 | PM2-LF10-C1 | PM2-LL10-C1 |
| Dark-ON | PM2-LH10B-C1 | PM2-LF10B-C1 | PM2-LL10B-C1 | |
| Sensing range | 2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 x 15 mm 0.591 in x 0.591 in) (Note 2) | |||
| Min. sensing object | ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in) |
|||
| Hysteresis | 20 % or less of operation distance with white non-glossy paper (15 x 15 mm 0.591 x 0.591 in) |
|||
| Repeatability (perpendicular to sensing axis) |
0.08 mm 0.003 in or less (Note 3) | |||
| Supply voltage | 5 to 24 V DC ± 10 % Ripple P-P 5 % or less | |||
| Current consumption | Average: 25 mA or less, Peak: 80 mA or less | |||
| Output | NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
|||
| Utilization category | DC-12 or DC-13 | |||
| Overcurrent protection | Incorporated | |||
| Response time | 0.8 ms or less | |||
| Operation indicator | Red LED (lights up when the output is ON) | |||
| Pollution degree | 3 (Industrial environment) | |||
| Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +80 ℃ -13 to +176 ℉ |
|||
| Ambient humidity | 45 to 85 % RH, Storage: 45 to 85 % RH | |||
| Ambient illuminance | Incandescent light: 3,500 lx at the light-receiving face | |||
| EMC | EN 60947-5 | |||
| Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each | |||
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each | |||
| Emitting element | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | |||
| Material | Enclosure: Polycarbonate, Fixed cable part: PBT | |||
| Cable | 0.2 mm2 3-core cabtyre cable, 1 m 3.281 ft long (Note 4) | |||
| Cable length | - | |||
| Weight |
Net weight: 25 g approx
Gross weight: 330 g approx (10 piece package) |
|||
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
3) The repeatability is specified for white non-glossy paper (15 x 15 mm 0.591 x 0.591 in) at a setting distance of 5 mm 0.197 in.
4) Cable cannot be extended
