EZ-10 Photoelectric Sensors Specifications
Specifications for this product appear below.
| Type | NPN output | PNP output | |
|---|---|---|---|
| Model No. | EZ-11 | EZ-11-PN | |
| Sensing range | 5 m 16.404 ft (without container or pipe) (Note 2) | ||
| Sensing object | ø12 mm ø0.472 mm or more liquid which contains water, or opaque object (Note 3) | ||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | ||
| Current consumption | Emitter: 25 mA or less, Receiver: 25 mA or less | ||
| Output | NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 100 mA source current) 0.4 V or less (at 16 mA source current) |
|
| Utilization category | DC-12 or DC-13 | ||
| Output operation | Switchable either Light-ON or Dark-ON | ||
| Response time | 12 ms or less | ||
| Sensitivity adjuster | Continuously variable adjuster | ||
| Pollution degree | 3 (Industrial environment) | ||
| Protection | IP67 (IEC) | ||
| Ambient temperature | 0 to +55 ℃ +32 to +131 ℉ (No dew condensation allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
||
| EMC | EN 60947-5-2 | ||
| Emitting element | Infrared LED (modulated) | ||
| Material | Polycarbonate | ||
| Net Weight | Emitter: 45 g approx., Receiver: 50 g approx. | ||
| Accessory | Adjusting screwdriver: 1 pc. | ||
| Dimensions | W12 x H31 x D20 mm W0.472 x H1.221 x D0.787 in | ||
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The sensing range shortens depending on the thickness, material, color, etc., of the container or pipe.
3) If there are two slit masks on both sides, the size of those slit masks represents the min. sensing object.
