EZ-10 Photoelectric Sensors Dimensions
Dimensions/model drawings for this product appear below. Units are usually notated in millimeters (mm) and in inches (in) (if provided).
EZ-11 EZ-11-PN
Sensor
Notes:
1) Not incorporated on the emitter.
2) It is the power indicator (orange) on the emitter.
EZ-11-PN EZ-11-PN-J
Notes:
1) Not incorporated on the emitter.
2) It is the power indicator (orange) on the emitter.
MS-CX2-1
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with the receiver of EZ-11(-PN)
MS-CX2-2
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with the receiver of EZ-11(-PN)
MS-CX2-4
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 14 mm 0.551 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with the receiver of EZ-11(-PN)
MS-CX2-5
Sensor mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with the receiver of EZ-11(-PN)
MS-CX-3
Material:
Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with the receiver of EZ-11(-PN)
MS-AJ1
Universal sensor mounting stand (Optional)
Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.
Note:
The dimensions in the brackets indicate the adjustable range of the movable part.
MS-AJ2
Universal sensor mounting stand (Optional)
Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.
Note:
The dimensions in the brackets indicate the adjustable range of the movable part.
MS-AJ1 MS-AJ2
Universal sensor mounting stand (Optional)
Assembly dimensions (Mounting part only)
MS-AJ1-A
MS-AJ1-A Universal sensor mounting stand (Optional)
Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.
Notes:
1) The dimensions in the brackets indicate the adjustable range of the movable part.
2) Refer to MS-AJ1/AJ2 for the assembly dimensions with sensor mounting bracket or sensor.
MS-AJ2-A
MS-AJ2-A Universal sensor mounting stand (Optional)
Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.
Notes:
1) The dimensions in the brackets indicate the adjustable range of the movable part.
2) Refer to MS-AJ1/AJ2 for the assembly dimensions with sensor mounting bracket or sensor.
