EX-30 Photoelectric Sensors Specifications
Specifications for this product appear below.
| Type | Thru-beam | Diffuse reflective | ||||
|---|---|---|---|---|---|---|
| Model No. | With operation mode switch | |||||
| NPN output | EX- 31A | EX- 31B | EX- 33 | EX- 32A | EX- 32B |
|
| PNP output | EX- 31A- PN | EX- 31B- PN | EX- 33- PN | EX- 32A- PN | EX- 32B- PN |
|
| Sensing range | 500 mm 19.685 in | 800 mm 31.496 in |
50 mm 1.969 in (Note 2) | |||
| Sensing object | ø2 mm ø0.079 in or more opaque object (Completely beam interrupted objects) | Opaque, translucent or transparent object (Note 3) | ||||
| Hysteresis | - | 15 % or less of operation distance (Note 2) | ||||
| Repeatability (perpendicular to sensing axis) |
0.05 mm 0.002 in or less | 0.5 mm 0.020 in or less | ||||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||||
| Current consumption | Emitter: 10 mA or less, Receiver: 15 mA or less | 20 mA or less | ||||
| Output | NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current) PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1 V or less (at 50 mA source current) 0.4 V or less (at 16 mA source current) |
|||||
| Utilization category | DC-12 or DC-13 | |||||
| Output operation | Light-ON | Dark-ON | Switchable either Light-ON or Dark-ON |
Light-ON | Dark-ON | |
| Short-circuit protection | Incorporated | |||||
| Response time | 0.5 ms or less | |||||
| Operation indicator | Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type) |
|||||
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition, incorporated on the receiver) |
Green LED (lights up under stable light received condition or stable dark condition) |
||||
| Sensitivity adjuster | - | Continuously variable adjuster | ||||
| Pollution degree | 3 (Industrial environment) | |||||
| Protection | IP67 (IEC) | |||||
| Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
|||||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||||
| Ambient illuminance | Incandescent light: 3,000 lx at the light-receiving face | |||||
| EMC | EN 60947-5-2 | |||||
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |||||
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |||||
| Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in amplitude (20 G max.) in X, Y and Z directions for two hours each | |||||
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each | |||||
| Emitting element | Red LED (modulated) | |||||
| Material | Enclosure: Die-cast zinc (Nickel plated), Lens: Polycarbonate [EX-32□(-PN): Acrylic], Enclosure cover: Polycarbonate | |||||
| Cable | 0.1 mm2 3-core (thru-beam type sensor emitter: 2-core) cabtyre cable, 2 m 6.562 ft long | |||||
| Cable extension | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver). | |||||
| Weight | Net weight (each emitter and receiver): 20 g approx. Gross weight: 65 g approx. |
Net weight: 20 g approx., Gross weight: 45 g approx. | ||||
| Accessories | Nut: 2 pcs., Toothed lock washer: 2 pcs. | Nut: 1 pc., Toothed lock washer: 1 pc. | ||||
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.
3) Make sure to confirm detection with an actual sensor before use.
