EX-10 Photoelectric Sensors Specifications
Specifications for this product appear below.
| Type | Thru-beam | |||||
|---|---|---|---|---|---|---|
| Front sensing | Side sensing | Front sensing | Side sensing | Front sensing | ||
| Model No. (Note 2) | Light-ON | EX-11A (-PN) | EX-11EA (-PN) | EX-13A (-PN) | EX-13EA (-PN) | EX-19A (-PN) |
| Dark-ON | EX-11B (-PN) | EX-11EB (-PN) | EX-13B (-PN) | EX-13EB (-PN) | EX-19B (-PN) |
|
| Sensing range | 150 mm 5.906 in | 500 mm 19.685 in | 1 m 3.281 ft | |||
| Min. sensing object |
ø1 mm ø0.039 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 150 mm 5.906 in) |
ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 500 mm 19.685 in) |
ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 1 m 3.281 ft) |
|||
| Hysteresis | - | |||||
| Repeatability (perpendicular to sensing axis) |
0.05 mm 0.002 in or less | |||||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||||
| Current consumption | Emitter: 10 mA or less, Receiver: 15 mA or less | |||||
| Output | NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current) PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1 V or less (at 50 mA source current) 0.4 V or less (at 16 mA source current) |
|||||
| Utilization category | DC-12 or DC-13 | |||||
| Short-circuit protection | Incorporated | |||||
| Response time | 0.5 ms or less (Note 7) | |||||
| Operation indicator | Red LED (lights up when the output is ON) | |||||
| Incident beam indicator | - | |||||
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
|||||
| Pollution degree | 3 (Industrial environment) | |||||
| Protection | IP67 (IEC) | |||||
| Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (EX-17W: -25 to +50 ℃ -13 to +122 ℉) (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
|||||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||||
| Ambient illuminance | Incandescent light: 3,000 lx at the light-receiving face | |||||
| EMC |
EN 60947-5-2 | |||||
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |||||
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |||||
| Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each | |||||
| Shock resistance |
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each | |||||
| Emitting element | Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated) | |||||
| Material | Enclosure: Polyethylene terephthalate Lens: Polyalylate |
|||||
| Cable (Note 8) | 0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long |
|||||
| Cable extension | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (thru-beam type: emitter and receiver). | |||||
| Weight | Net weight (each emitter and receiver): 20 g approx., Gross weight: 60 g approx. |
|||||
| Accessories | Mounting screws: 1 set | |||||
| Type | Convergent refl ective (Diffused beam type) | Thru-beam ・ with operation mode switch on bifurcation | ||||
|---|---|---|---|---|---|---|
| Front sensing | Front sensing | Side sensing | Front sensing | Side sensing | ||
| Model No. (Note 2) | Light-ON | EX-14A (-PN) | EX-15 (Note 3) | EX-15E (Note 3) | EX-17(W) (Note 3, 4) | EX-17E (Note 3) |
| Dark-ON | EX-14B (-PN) |
|||||
| Sensing range | 2 to 25 mm 0.079to 0.984 in (Note 5) (Conv. point: 10 mm 0.394 in) |
150 mm 5.906 in | 500 mm 19.685 in | |||
| Min. sensing object |
ø0.1 mm ø0.004 in copper wire (Completely beam interrupted object) (Setting distance: 10 mm 0.394 in) |
ø1 mm ø0.039 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 150 mm 5.906 in) |
ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 500 mm 19.685 in) |
|||
| Hysteresis | 15 % or less of operation distance (Note 5) |
- | ||||
| Repeatability (perpendicular to sensing axis) |
0.1 mm 0.004 in or less | 0.05 mm 0.002 in or less | ||||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||||
| Current consumption | 20 mA or less | 30 mA or less | ||||
| Output | NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current) ・・・ PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1 V or less (at 50 mA source current) 0.4 V or less (at 16 mA source current) |
NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage (Note 6): 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
||||
| Utilization category | DC-12 or DC-13 | - | ||||
| Short-circuit protection | Incorporated | |||||
| Response time | 0.5 ms or less (Note 7) | |||||
| Operation indicator | Red LED (lights up when the output is ON) | Orange LED (lights up when the output is ON), located on the bifurcation |
||||
| Incident beam indicator | - | Red LED (lights up under light received condition), located on the receiver |
||||
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
Green LED (lights up under stable light received condition or stable dark condition), located on the receiver |
||||
| Pollution degree | 3 (Industrial environment) | - | ||||
| Protection | IP67 (IEC) | |||||
| Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (EX-17W: -25 to +50 ℃ -13 to +122 ℉) (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
|||||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||||
| Ambient illuminance |
Incandescent light: 3,000 lx at the light-receiving face | |||||
| EMC | EN 60947-5-2 | - | ||||
| Voltage withstandability |
1,000 V AC for one min. between all supply terminals connected together and enclosure | |||||
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |||||
| Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each | |||||
| Shock resistance |
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each | |||||
| Emitting element | Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated) | |||||
| Material | Enclosure: Polyethylene terephthalate Lens: Polyalylate |
Enclosure: Polyethylene terephthalate Lens: Polyalylate, Bifurcation: Polyalylate |
||||
| Cable (Note 8) | 0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long |
0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long (beyond bifurcation; from emitter / receiver to bifurcation: 0.5 m 1.640 ft long) | ||||
| Cable extension | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (thru-beam type: emitter and receiver). | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | ||||
| Weight | Net weight: 20 g approx. Gross weight: 40 g approx |
Net weight: 55 g approx., Gross weight: 80 g approx. | ||||
| Accessories | Mounting screws: 1 set | Mounting screws: 1 set, Adjusting screwdriver: 1 pc. | ||||
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) Model Nos. having the suffix "-PN" are PNP output type.
3) Either Light-ON or Dark-ON can be selected by the operation mode switch (located on the bifurcation).
4) Model Nos. having the suffix "W" are series connection type.
5) The sensing range and the hysteresis of convergent reflective type sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) as the object.
6) Consider the output residual voltage due to the series connection when supplying power to the EX-17W.
7) The maximum response time of the EX-17W is 50 ms with two units in series connection.
8) The flexible cable type (model Nos. having suffix "-R") has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) flexible cabtyre cable, 2 m 6.562 ft long.
