LD Measurement Sensors Specifications
Specifications for this product appear below.
Sensor heads
| Conforming standards / regulations | IEC / JIS standards | FDA regulations / IEC / JIS standards |
|---|---|---|
| Model No. | LD-600 | LD-601 |
| Applicable controller | LD-C60 | |
| Distance between emitter and receiver |
40 mm 1.575 in (fixed) | |
| Sensing width | 15 mm 0.591 in (beam width: 20 mm 0.787 in) | |
| Min. sensing object | ø0.5 mm ø0.020 in | |
| Resolution | 11 μm 0.433 mil | |
| Scan time | 0.6 ms approx. | |
| Emitting element | Red semiconductor laser Class 1 (IEC / JIS standards) (Max. output: 0.2 mW, Peak emission wavelength: 670 nm 0.026 mil) |
Red semiconductor laser Class II (FDA regulations) (Max. output: 0.2 mW, Peak emission wavelength: 670 nm 0.026 mil) (IEC / JIS standards: class 1) |
| Power indicator | Red LED (lights up when the power is ON) |
- |
| Laser emission indicator |
- | Green LED (Lights up during laser emission) |
| Ambient temperature |
0 to +40 ℃ +32 to +104 ℉ (No dew condensation) Storage: -10 to +60 ℃ +14 to +140 ℉ |
|
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |
| Enclosure earthing | Capacitor earth | |
| Material | Emitter enclosure: Die-cast zinc Receiver enclosure: Aluminum, Base: Aluminum Top cover: PPO, Front protection cover: Glass |
|
| Cable | 6-core (0.22 mm2 x 4, 0.18 mm2 x 2) cabtyre cable, 1 m 3.281 ft long (with connector on one end) |
|
| Weight | Net weight: 420 g approx. | |
| Accessories | M4 (length 12 mm 0.472 in) hexagon-socket-head bolt: 2 pcs. |
M4 (length 12 mm 0.472 in) hexagon-socket-head bolt: 2 pcs. Laser attenuator: 1 pc. |
| Dimensions | W32 x H50 x D145.5 mm W1.260 x H1.969 x D5.728 in | |
Note:
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
Controller
| Model No. | LD-C60 | |
|---|---|---|
| Applicable sensor heads |
LD-600, LD-601 | |
| Sensing modes | Width measurement, edge measurement | |
| Measuring accuracy |
Width measurement: ±44 μm ±1.732 mil Edge measurement: ±22 μm ±0.866 mil |
|
| Supply voltage | 24 V DC ± 10 % Ripple P-P 10 % or less | |
| Current consumption | 250 mA or less (including sensor head) | |
| Input (REQ, SHD) |
Signal conditions: Low...0 to 1 V High...5 to 30 V, or open Applied voltage: 30 V DC or less |
|
| Output (ACK, D0 to D10) |
NPN open-collector transistor ・Maximum sink current: 20 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1 V or less (at 20 mA sink current) |
|
| Output operation | ACK: ON during data output, D0 to D10: pixel binary output | |
| Response time | 1.2 ms or less | |
| Indicators | Power | Red LED (lights up when the power is ON) |
| REQ | Red LED (lights up when the REQ input is Low) | |
| ACK | Red LED (lights up when the ACK output is ON) | |
| Measurement display | 4 digit LED (letter height 8 mm 0.315 in) | |
| Display resolution | 10 μm 0.394 mil | |
| Ambient temperature |
0 to +40 ℃ +32 to +104 ℉ (No dew condensation) Storage: -10 to +60 ℃ +14 to +140 ℉ |
|
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |
| Material | Enclosure: ABS, Front panel: ABS Display panel: Polycarbonate, Terminal cover: Polycarbonate |
|
| Weight | Net weight: 230 g approx. | |
| Accessory | Connector: 1 pc. | |
| Dimensions | W35 x H170 x D80 mm W1.378 x H6.693 x D3.150 in | |
Note:
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
