HL-T1 Measurement Sensors Dimensions
Dimensions/model drawings for this product appear below. Units are usually notated in millimeters (mm) and in inches (in) (if provided).
HL-T1001A(F) HL-T1005A(F)
Sensor Head
Emitter
Notes:
1) IEC / JIS conforming products do not contain light beam shielding plate, or certification / identification label.
2) The receiver of HL-T1001A(F) does not incorporate a slit.
Receiver
HL-T1010A HL-T1010F
Sensor head
Emitter
Note:
IEC / JIS conforming products do not contain light beam shielding plate, or certification / identification label.
Receiver
HL-AC1 HL-AC1P
Controller
Mounting drawing with a mounting bracket MS-HLAC1-1 (Optional)
HL-AC1-CL
Calculation unit (Optional)
MS-HLT1-1
Sensor head mounting bracket for HL-T1001A(F) / HL-T1005A(F)
[Accessory for HL-T1001A(F) / HL-T1005A(F)]
Material:
Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Two M3 (length 20 mm 0.787 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with HL-T1005A's receiver
MS-LA3-1
Sensor head mounting bracket for HL-T1010A(F)
[Accessory for HL-T1010A(F)]
Material:
Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Two M3 (length 25 mm 0.984 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with HL-T1010A's receiver
MS-HLAC1-1
Controller mounting bracket (Optional)
CN-HLT1-1
Sensor head to controller connection cable
(Accessory for sensor head)
HL-T1SV1
Side-view attachment for HL-T1001A(F) / HL-T1005A(F) (Optional)
Material:
Polyetherimide (Enclosure), Glass (Front cover)
Two M2 (length 6 mm 0.236 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with HL-T1005A's receiver
HL-T1SV2
Side-view attachment for HL-T1010A(F) (Optional)
Material:
Polyetherimide (Enclosure), Glass (Front cover)
Two M2 (length 6 mm 0.236 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with HL-T1010A's receiver
