LS Laser Sensors Dimensions
Dimensions/model drawings for this product appear below. Units are usually notated in millimeters (mm) and in inches (in) (if provided).
LS-H91(-A) LS-H91F(-A)
Sensor head
LS-H92 LS-H92F
Sensor head
LS-H21(-A) LS-H21F(-A)
Sensor head
LS-H22 LS-H22F
Sensor head
LS-401 LS-401P
Amplifier
LS-401-C2 LS-401P-C2
Amplifier
CN-74-C1 CN-74-C2 CN-74-C5
Main cable (Optional)
Length L
CN-72-C1 CN-72-C2 CN-72-C5
Sub cable (Optional)
Length L
MS-DIN-E
End plate (Optional)
Material: Polycarbonate
RF-230
Reflector [Accessory for LS-H92(F)]
Material: Acrylic (Reflector)
ABS (Base)
RF-330
Reflector (Accessory for LS-H91□)
Material: Acrylic (Reflector)
ABS (Base)
RF-310
Reflector (Optional)
Material: Acrylic (Reflector)
ABS (Base)
RF-33 RF-31
Reflective tape (Optional)
MS-DIN-2
Amplifier mounting bracket (Optional)
Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
MS-CX-1
Sensor head mounting bracket (Optional)
Material: Stainless steel (SUS301)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
MS-CX-2
Sensor head mounting bracket (Optional)
Material:
Stainless steel (SUS304) Two M3 (length 12 mm 0.472 in) screws with washers are attached.
MS-CX-3
Sensor head mounting bracket (Optional)
Material:
Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
MS-CX-4
Sensor head mounting bracket (Optional)
Material: Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in)
screws with washers are attached.
MS-CX-11
Sensor mounting bracket for beam axis alignment (Optional)
Material: Zinc die-cast
Two M3 (length 14 mm 0.551 in)
screws with washers are attached.
MS-RF23
Reflector mounting bracket for RF-230 (Optional)
Material: Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M4 (length 10 mm 0.394 in) screws with washers are attached.
Assembly dimensions
