FD Fiber Optic Sensors Specifications
Specifications for this product appear below.
| Type | Standard | Flexible | |
|---|---|---|---|
| Model No. | FT/FD-B8, FT/FD-FM□, FT/FD-N□, FT/FD-R80, FT/FD-S□, FT/FD-T□, FT/FD-V□ | FT/FD-P□, FT-Z□ (excluding tough flexible fiber and chemical-resistant fiber) |
|
| Allowable bending radius | R25 mm R0.984 in or more [Sleeve of a head with sleeve: R10 mm R0.394 in or more (Note 2)] |
R4 mm R0.157 in or more | |
| Bending durability | - | 1 million times or more (at R10 mm R0.394 in, FT-P40/P2 and FD-P40/P2: at R4 mm R0.157 in) |
|
| Ambient temperature | -40 to +70 ℃ -40 to +158 ℉ (FT-SFM2SV2: -20 to +70 ℃ -4 to +158 ℉ FT-V22, FD-SFM2SV2: -20 to +60 ℃ -4 to +140 ℉ FT-V41, FD-V41, FT-V10: -40 to +60 ℃ -40 to +140 ℉) |
-40 to +70 ℃ -40 to +158 ℉ (FT-Z8□, FT-P60, FT-PS1, FD-P60, FD-P50: -40 to +60℃ -40 to +140 ℉) |
|
| Ambient humidity | 35 to 85 % RH (No dew condensation or icing allowed) | ||
| Material | Fiber core | Acrylic | |
| Sheath | Polyethylene (FT-V22: Polyolefin) | Vinyl chloride (FT-PS1: Polyethylene, FD-P2: Vinyl chloride and polyurethane) |
|
| Fiber head | Brass (Nickel plated) (FT-SFM2L/T80/SFM2/SNFM2/ SFM2SV2/V22/V41, FD-T80/T40/S80/SNFM2/ SFM2SV2/V41 and sleeve: Stainless steel (SUS) FT-FM10L: ABS Lens of FT-FM10L/ SFM2L/V10: Acrylic FT-V10: Stainless steel (SUS) and Pholycarbonate) |
Stainless steel (SUS) (FT/FD-P80, FT-P60: Brass (Nickel plated) Case of FT-Z8□: Polycabonate Lens of FT-Z8H/Z8E, Front film of FT-Z8: Polyester) |
|
| Accessories (Note 3) |
All fibers: 1 fiber attachment set Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc. Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer 1 pc. (thru-beam type: 2 pcs.) |
All fibers: 1 fiber attachment set. (excluding FT-P80 and FD-P80) Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc. (FT/FD-P80: FX-CT1 1 pc.) Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer 1 pc. (thru-beam type: 2pcs.) FT-Z8□: 1set of mounting screw |
|
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) Sleeve part of side-view fiber cannot be bent.
3) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-100/300/311/410 series. Only one of these five fiber attachments is provided with each fiber.
| Type | Sharp bending | |
|---|---|---|
| Model No. | FT/FD/FR-W□ | |
| Allowable bending radius | R1 mm R0.039 in or more (FD-WG4/WSG4: R2 mm R0.079 in or more, Sleeve of FD-W44: R10 mm R0.394 in or more) |
|
| Ambient temperature | -40 to +60 ℃ -40 to +140 ℉ (FT-WA30/WA8/WKV8: -40 to +55 ℃ -40 to +131 ℉, FD-WL48: -20 to +60 ℃ -4 to +140 ℉, FR-WKZ11: -25 to +55 ℃ -13 to +131 ℉) |
|
| Ambient humidity | 35 to 85 % RH (No dew condensation or icing allowed) | |
| Material | Fiber core | Acrylic |
| Sheath | Polyethylene | |
| Fiber head | Stainless steel (SUS) (including sleeve) [FT-W8/W4, FD-W8/W44/WG4: Brass (Nickel plated), Case of FT-WR80(L): Die-cast zinc alloy, Case of FT-WA30/WA8/WZ□(HB), FD-WZ□(HB), Case of FR-WKZ11, Case and prism of FD-WL48, Lens of FT-WS8L and Resin part of FT-WKV8: Polycarbonate, Lens of FT-WA30/WA8: Norbornere resin, Lens of FT-WZ8H/WZ8E and FT-WR80L, Reflector of FT-WZ8E, Prism of FT-WKV8 and FT/FD-WZ4/WZ7: Acrylic, Reflector of FT-WZ8: Polycarbonate, Case of FD-WL41: Heat-resistant ABS, Front film of FD-WL41: Polyester, Lens of FD-WKZ1: Optical glass, Lens of FR-WKZ11: Crown glass (BK7), Inner pipe of FT/FD-WZ□(HB): Stainless steel (SUS304).] |
|
| Accessories (Note 2) |
All fibers: 1 fiber attachment set and FX-CT2 (fiber cutter) 1 pc. Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer 1 pc. (thru-beam type: 2 pcs.) FT-WA30: 0.5 x 32 mm 0.020 x 1.260 in seal type slit mask 2 pcs. FT-WA8: 0.5 x 12 mm 0.020 x 0.472 in seal type slit mask 2 pcs. and 1 x 12 mm 0.039 x 0.472 in seal type slit mask 2 pcs. FT-WZ8□, FT/FD-WZ4□(HB): 1 set of mounting screw FD-WKZ1: MS-FD-2 (fiber mounting bracket) 1 pc. FR-WKZ11: MS-FD-2 (fiber mounting bracket) 1 pc, RF-13 (reflective tape) 1 pc. |
|
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-100/300/311/410 series. Only one of these five fiber attachments is provided with each fiber.
| Type | Special use | ||||
|---|---|---|---|---|---|
| Wide beam | Array | Narrow beam, Wafer mapping | High precision | ||
| Model No. | FT-A8/ A30 FD-A15 (Note 3) | FT-AFM2/ AFM2E FD-AFM2/ AFM2E | FT-K8/ KV8/WKV8 FT/FR-KV1 FR-KZ21/ KZ21E | FD-EG1/ EG2/EG3 FD-G4/G6 |
|
| Allowable bending radius | FT-A30/A8: R10 mm R0.394 in or more FD-A15: R25 mm R0.984 in or more |
R25 mm R0.984 in or more | R25 mm R0.984 in or more (FT/FR-KV1, FR-KZ21/KZ21E: R10 mm R0.394 in or more) |
FD-EG2/EG3: R10 mm R0.394 in or more FD-G4/G6/EG1: R25 mm R0.984 in or more |
|
| Ambient temperature | FT-A30, FD-A15: -40 to +60 ℃ -40 to +140 ℉ FT-A8: -40 to +70 ℃ -40 to +158 ℉ |
-40 to +70 ℃ -40 to +158 ℉ | -40 to +60 ℃ -40 to +140 ℉ | -20 to +60 ℃ -4 to +140 ℉ (FD-G4: -40 to +70 ℃ -40 to +158 ℉, FD-G6: -40 to +60 ℃ -40 to +140 ℉) |
|
| Ambient humidity | 35 to 85 % RH (No dew condensation or icing allowed) | ||||
| Material | Fiber core | Acrylic | |||
| Sheath | Polyethylene | Polyolefin (FD-G4/G6: Polyethylene) |
|||
| Fiber head | Polycarbonate (Lens of FT-A8/A30 and FD-A15: Nor bornene resin) |
Brass (Nickel plated) Liquid crystal polymer |
Stainless steel (SUS), Polycarbonate (Lens: Norbornene resin, Case of FR-KZ21/KZ21E: ABS, Prism of FT-KV8 and FR-KZ21E: Acrylic) |
Brass (Nickel plated) [FD-G6: Stainless steel (SUS)] |
|
| Accessories (Note 2) |
All fibers: 1 fiber attachment set and FX-CT2 (fiber cutter) 1 pc. FT-A30: 0.5 x 32 mm 0.020 x 1.260 in seal type slit mask 2 pcs. FT-A8: 0.5 x 12 mm 0.020 x 0.472 in seal type slit mask 2 pcs. and 1 x 12 mm 0.039 x 0.472 in seal type slit mask 2 pcs. |
All fibers: 1 fiber attachment set Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc. Threaded head fibers: Nuts 2 pcs. and toothed lock washer 1pc. FR-KV1: Reflector 1 pc, M1.4 (length: 1.6 mm 0.063 in) stainless steel (SUS) mounting screw 4 pcs. FR-KZ21/KZ21E: RF-003 (reflector) 1 pc, MS-FD-2 (fiber mounting bracket) 1 pc. |
|||
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-100/300/311/410 series. Only one of these five fiber attachments is provided with each fiber.
3) The FT-WA8/WA30 is in the "Sharp bending type" section of the previous page.
| Type | Special use | |||
|---|---|---|---|---|
| Ultra-small diameter | Convergent reflective | Tough flexble | ||
| Model No. | FT/FD-E12/E22 FD-EN500S1 FD-ENM1S1 | FD-L4□ | FT/FD-P81X FD-G6X |
|
| Allowable bending radius | FT-E12/E22: R5 mm R0.197 in or more (Note 2) FD-E12: R10 mm R0.394 in or more (Note 2) FD-E22/EN500S1/ENM1S1: R25 mm R0.984 in or more (Note 2) |
R10 mm R0.394 in or more FD-L43/L45: R4 mm R0.157 in or more, FD-L45A, FD-L46: R25 mm R0.984 in or more |
R10 mm R0.394 in or more | |
| Ambient temperature | FT-E12/E22, FD-E22: -40 to +70 ℃ -40 to +158 ℉ FD-E12: -40 to +60 ℃ -40 to +140 ℉ FD-EN500S1/ENM1S1: -20 to +60 ℃ -4 to +140 ℉ |
FD-L43/L45/L45A: 0 to +70 ℃ +32 to +158 ℉ FD-L41/L44/L44S/L46: -40 to +60 ℃ -40 to +140 ℉ FD-L4: -40 to +70 ℃ -40 to +158 ℉ |
-40 to +60 ℃ -40 to +140 ℉ (FD-P81X: -40 to +70 ℃ -40 to +158 ℉) |
|
| Ambient humidity | 35 to 85 % RH (No dew condensation or icing allowed) | |||
| Material | Fiber core | Acrylic | ||
| Sheath | Polyolefin | Polyethylene | Polyethylene [FT-P81X: Vinyl chloride, Protective tube: Stainless steel (SUS)] |
|
| Fiber head | Brass (Nickel plated) [Sleeve: Stainless steel (SUS)] |
FD-L41/L43/L45/L45A: Heat-resistant ABS Case of FD-L4/L46: ABS [Case of FD-L44/L44S: Polycarbonate, Slit of FD-L44S: Stainless steel (SUS304), Lens of FD-L4/L43/L44/L44S/L45/L45A: Acrylic, Front film of FD-L41: Polyester, Lens of FD-L46: Norbornene resin] |
FT-P81X, FD-P81X: Brass (Nickel plated) FD-G6X: Stainless steel (SUS) |
|
| Accessories (Note 3) |
All fibers: 1 fiber attachment set Threaded head fibers: Nuts 2 pcs. (FT-E12/E22: 4 pcs.) and toothed lock washer 1pc. (FT-E12/E22: 2 pcs.) |
All fibers: 1 fiber attachment set and FX-CT2 (fiber cutter) 1pc. FD-L4: M2.6 (length 12 mm 0.472 in) screws with washers 2 pcs. and nuts 2 pcs. |
All fibers: 1 fiber attachment set, nuts 2 pcs. (FT-P81X: 4 pcs.) and toothed lock washer 1 pc.(FT-P81X: 2 pcs.) FD-G6X: FX-CT2 (fiber cutter) 1 pc. |
|
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) Sleeve part cannot be bent.
3) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-100/300/311/410 series. Only one of these five fiber attachments is provided with each fiber.
| Type | Special use | ||||
|---|---|---|---|---|---|
| Leak liquid detection | Liquid detection | ||||
| Model No. | FD-F705 | FT-F902 | FD-F8Y | FD-F4□ | |
| Allowable bending radius | Protective tube: R20 mm R0.787 in or more Fiber cable: R4 mm R0.157 in or more |
Protective tube: R40 mm R1.575 in or more Fiber: R15 mm R0.591 in or more |
R10 mm R0.394 in or more | ||
| Bending durability | Fiber cable: 1 million times or more (at R4 mm R0.157 in) |
- | |||
| Ambient temperature | -20 to +50 ℃ -4 to +122 ℉ (Note 2) |
-20 to +60 ℃ -4 to +140 ℉ (Note 2) |
-40 to +125 ℃ -40 to +257 ℉ (Note 2) |
-40 to +100 ℃ -40 to +212 ℉ (Note 2) |
|
| Ambient humidity | 35 to 85%RH (No dew condensation or icing allowed) | ||||
| Material | Fiber core | Acrylic | Polycarbonate | ||
| Sheath | Vinyl chloride (Protective tube: Fluorine resin) |
Polypropylene (Protective tube: Fluorine resin) |
Polyethylene | ||
| Fiber head | Outer casing: Fluorine resin, Interior: Heat-resistant ABS, Acrylic, Brass (Nickel plated) | Enclosure: Heat-resistant ABS Lens: Acrylic |
Polyetherimide (Lens: Polycarbonate) |
||
| Accessories (Note 3) |
1 fiber attachment set, FX-CT2 (fiber cutter) 1 pc., MS-FD-F7-1 (SUS mounting bracket) 1pc., MS-FD-F7-2 (PVC mounting bracket) 1pc. |
1 fiber attachment set, FX-CT2 (fiber cutter) 1 pc., Tying band 2 pcs., Anti-slip tube 2 pcs. | 1 fiber attachment set FX-CT2 (fiber cutter) 1 pc. | 1 fiber attachment set, FX-CT2 (fiber cutter) 1 pc. Tying band, 4 pcs., Anti-slip tube 2 pcs. |
|
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) Liquid being setected should also be kept within the rated ambient temperature range.
3) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-100/300/311/410 series. Only one of these five fiber attachments is provided with each fiber.
| Type | Environment resistant | |||||
|---|---|---|---|---|---|---|
| Heat-resistant | ||||||
| Model No. | FT/FD-H□ | |||||
| 350 ℃ 662 ℉ type | 300 ℃ 572 ℉ type | 200 ℃ 392 ℉ type | 180 ℃ 356 ℉ type | 130 ℃ 266 ℉ type | ||
| Allowable bending radius | R25 mm R0.984 in or more (FT-H20W-M1, Sleeve of a head with sleeve: R10 mm R0.394 in or more, FT-H20-J□/VJ□: R18 mm R0.709 in or more) |
|||||
| Ambient temperature | -60 to +350 ℃ -76 to +662 ℉ (Note 2, 3) |
-60 to +300 ℃ -76 to +572 ℉ (Note 2, 3) |
-60 to +200 ℃ -76 to +392 ℉ (Note 3) |
-60 to +180 ℃ -76 to +356 ℉ (Note 3, 5) |
-60 to +130 ℃ -76 to +266 ℉ |
|
| Ambient humidity | 35 to 85%RH (No dew condensation or icing allowed) | |||||
| Material | Fiber core | Multi-component glass (Note 4) | Silicone | Acrylic | ||
| Sheath | Stainless steel (SUS) | Silicone [Inside Stainless steel (SUS) spiral tube] [FT-H20W-M1: Fluorine resin FD-H20-21, FT-H20-J□/VJ□: Stainless steel (SUS)] |
Fluorine resin | |||
| Fiber head | Brass (Nickel plated) [FD-H20-21: Stainless steel (SUS) Prism of FT-H20-VJ□: Glass Lock nut of FT-H20-J□/VJ□: Polybutylene terephthalate] |
Stainless steel (SUS) |
Brass (Nickel plated) |
|||
| Accessories (Note 6) |
FT-H20-J□/VJ□, FT-H20W-M1, FD-H18-L31 and FT-H13-FM2: 1 fiber attachment set Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc. Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer 1pc. (thru-beam type: 2 pcs.) FT-H20-J□/VJ□: M4 x 0.7 nut (Polycarbonate) 2 pcs., M4 spring washer 2 pcs. |
|||||
| Type | Environment resistant | ||
|---|---|---|---|
| Chemical-resistant | Vacuum-resistant | ||
| Model No. | FT-HL80Y/L80Y/ V80Y/Z802Y | FT/FD-H30-□V | |
| Allowable bending radius | R30 mm R1.181 in or more (FT-Z802Y: R25 mm R0.984 in or more) |
R18 mm R0.709 in or more | |
| Ambient temperature | -40 to +70 ℃ -40 to +158 ℉ (FT-Z802Y: 0 to +60 ℃ +32 to +76 ℉ FT-HL80Y: -40 to +115 ℃ -40 to +239 ℉) |
-30 to +300 ℃ -22 to +572 ℉ (Note 3) |
|
| Ambient humidity | 35 to 85%RH (No dew condensation or icing allowed) | ||
| Material | Fiber core | Acrylic | Multi-component glass (Note 4) |
| Sheath | Protective tube: Fluorine resin Sheath: Polypropylene (Sheath of FT-Z802Y: Fluorine resin) |
Protection tube: Liner + braid tube [Stainless steel (SUS)] Socket plug: Joint; Stainless steel (SUS), Mounting cap nut: Stainless steel (SUS) |
|
| Fiber head | Stainless steel (SUS) (Lens of FD-H30-KZ1V/L32V: BK7 crown glass) |
||
| Accessories (Note 6) |
1 fiber attachment set FX-CT2 (fiber cutter) 1 pc. |
FT-H30-M1V: Nut 4 pcs., Toothed lock washer 2 pcs. FD-H30-KZ1V: MS-FD-2 (Fiber mounting bracket) 1 pc. |
|
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) If the fiber is used below -30 ℃ -22 ℉, its maximum resistable temperature drops to +200 ℃ +392 ℉. If the side-view lens FX-SV1 is put on the fiber head, the allowable maximum temperature drops to +300 ℃ +572 ℉. (The ambient temperature range of FX-SV1 is from +60 to +300 ℃ +76 to +572 ℉.)
3) The ambient temperature of heat-resistant 350 ℃ 662 ℉ type, 300 ℃ 572 ℉ type, 200 ℃ 392 ℉ type and 180 ℃ 356 ℉ type fibers are the value in dry condition. In humid environment, the ambient temperature differs. (For a high humidity of 85 % RH, the ambient temperature is 0 to +40 ℃ +32 to +104 ℉.)
4) If the fiber material is quartz glass or multi-component glass, keep it away from vibration or impact.
5) The normal temperature for continuous usage or storage should be -60 to +150 ℃ -76 to +302 ℉.
6) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-100/300/311/410 series. Only one of these five fiber attachments is provided with each fiber.
