LP-400 Laser Markers CO2 Specifications
Specifications for this product appear below.
General purpose type
| Type | General-purpose type | |||
|---|---|---|---|---|
| Set model No. | Standard models | LP-430U | LP-420S9U | LP-410U |
| Tower head models | LP-430TU | LP-420S9TU | LP-410TU | |
| Marking laser | Class 4 CO2 laser | |||
| Average output | 30 W | 20 W | 10 W | |
| Wavelength | 10.6 μm 0.417 mil | 9.3 μm 0.366 mil | 10.6 μm 0.417 mil | |
| Guide laser / pointer | Class 2 semiconductor laser; wavelength: 655 nm 0.026 mil | |||
| Marking range | 110 x 110 mm 4.3 x 4.3 in | |||
| Distance from target object (Note 1) | 185 mm 7.3 in | |||
| Scanning speed | Max. 12,000 mm/sec. | |||
| Line speed (Note 2) | 240 m/min. or less | 170 m/min. or less | ||
| Marking setting (character height, width) | 0.2 to 110 mm 0.008 to 4.3 in (variable in 0.001 mm 0.00004 in steps) |
|||
| Marking spacing (character spacing, line pitch) |
0 to 110 mm 0 to 4.3 in (variable in 0.001 mm 0.00004 in steps) Arced output: -180° to +180° (variable in 0.01° steps) |
|||
| Character arrays | Linear, proportional, monospaced, arced | |||
| Character types | English uppercase letters, english lowercase letters, numerals, katakana, hiragana, kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50) | |||
| Barcodes | Code 39, Code 128, ITF, NW-7, JAN / UPC, RSS-14 (GS1 DataBar), RSS (GS1 DataBar) Limited, RSS (GS1 DataBar) Expanded | |||
| 2D codes | QR Code, Micro QR Code, Data Matrix | |||
| Composite codes | RSS-14 (GS1 DataBar) CC-A, RSS-14 (GS1 DataBar) Stacked CC-A, RSS (GS1 DataBar) Limited CC-A, etc. | |||
| Logos / Graphics | BMP, DXF, HPGL, JPEG | |||
| Cooling method | Forced air cooling | |||
| Power voltage | 100 to 120 V AC ± 10 %, or 200 to 240 V AC ± 10 % (automatic switching), 50 / 60 Hz |
|||
| Power consumption | 100 V AC | 1,000 VA or less | 670 VA or less | |
| 200 V AC | 1,200 VA or less | 700 VA or less | ||
| Inputs | Remote, trigger, encoder (A), encoder (B), shutter control, laser excitation, alarm reset, emergency stop, laser stop, etc. | |||
| Outputs | Power supply (+12 V), remote, marking ready, marking, marking complete, laser excitation, warning, alarm, configuration complete, counter complete | |||
| Marking state | Still, moving | |||
| Functions | ・Marking order optimization ・Intersection correction ・Counter marking ・Current date marking ・Deadline date marking ・Lot marking ・Logo data marking ・Font creation and editing ・Monospaced alignment ・Updating of operating screen display ・System offset ・Shared character settings ・Guide laser ・Dual pointers ・Focus adjustment ・Overlapping marking ・Backup ・Marking on long moving objects ・Font selection ・Bold marking ・Proportional marking ・Marking image display ・Marking time measurement ・Target object image display ・Operator adjustment ・Rank marking ・Offset marking ・Time hold ・Step and repeat ・I/O check monitor ・I/O simulation ・Error log display ・Serial data marking ・Power and speed configuration by row or logo file |
|||
| Emergency stop switch | Located on controller | |||
| Ambient temperature | 0 to +40 ℃ +32 to +104 ℉ (Storage: -10 to +60 ℃ +14 to +140 ℉) (No dew condensation or icing allowed) |
|||
| Ambient humidity | 35 to 85 % RH (No dew condensation or icing allowed) | |||
| Net weight | Standard head | 20 kg | 16 kg | |
| Tower head | ||||
| Controller | 12 kg | 11 kg | ||
Small-spot type
| Type | Small-spot type | |||
|---|---|---|---|---|
| Set model No. | Standard models | LP-431U | LP-421S9U | LP-411U |
| Tower head models | LP-431TU | LP-421S9TU | LP-411TU | |
| Marking laser | Class 4 CO2 laser | |||
| Average output | 30 W | 20 W | 10 W | |
| Wavelength | 10.6 μm 0.417 mil | 9.3 μm 0.366 mil | 10.6 μm 0.417 mil | |
| Guide laser / pointer | Class 2 semiconductor laser; wavelength: 655 nm 0.026 mil | |||
| Marking range | 55 x 55 mm 2.2 x 2.2 in | |||
| Distance from target object (Note 1) | 111 mm 4.4 in | |||
| Scanning speed | Max. 6,000 mm/sec. | |||
| Line speed (Note 2) | 120 m/min. or less | 85 m/min. or less | ||
| Marking setting (character height, width) | 0.2 to 55 mm 0.008 to 2.2 in (variable in 0.001 mm 0.00004 in steps) |
|||
| Marking spacing (character spacing, line pitch) |
0 to 55 mm 0 to 2.2 in (variable in 0.001 mm 0.00004 in steps) Arced output: -180° to +180° (variable in 0.01° steps) |
|||
| Character arrays | Linear, proportional, monospaced, arced | |||
| Character types | English uppercase letters, english lowercase letters, numerals, katakana, hiragana, kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50) | |||
| Barcodes | Code 39, Code 128, ITF, NW-7, JAN / UPC, RSS-14 (GS1 DataBar), RSS (GS1 DataBar) Limited, RSS (GS1 DataBar) Expanded | |||
| 2D codes | QR Code, Micro QR Code, Data Matrix | |||
| Composite codes | RSS-14 (GS1 DataBar) CC-A, RSS-14 (GS1 DataBar) Stacked CC-A, RSS (GS1 DataBar) Limited CC-A, etc. | |||
| Logos / Graphics | BMP, DXF, HPGL, JPEG | |||
| Cooling method | Forced air cooling | |||
| Power voltage | 100 to 120 V AC ± 10 %, or 200 to 240 V AC ± 10 % (automatic switching), 50 / 60 Hz |
|||
| Power consumption | 100 V AC | 1,000 VA or less | 670 VA or less | |
| 200 V AC | 1,200 VA or less | 700 VA or less | ||
| Inputs | Remote, trigger, encoder (A), encoder (B), shutter control, laser excitation, alarm reset, emergency stop, laser stop, etc. | |||
| Outputs | Power supply (+12 V), remote, marking ready, marking, marking complete, laser excitation, warning, alarm, configuration complete, counter complete | |||
| Marking state | Still, moving | |||
| Functions | ・Marking order optimization ・Intersection correction ・Counter marking ・Current date marking ・Deadline date marking ・Lot marking ・Logo data marking ・Font creation and editing ・Monospaced alignment ・Updating of operating screen display ・System offset ・Shared character settings ・Guide laser ・Dual pointers ・Focus adjustment ・Overlapping marking ・Backup ・Marking on long moving objects ・Font selection ・Bold marking ・Proportional marking ・Marking image display ・Marking time measurement ・Target object image display ・Operator adjustment ・Rank marking ・Offset marking ・Time hold ・Step and repeat ・I/O check monitor ・I/O simulation ・Error log display ・Serial data marking ・Power and speed configuration by row or logo file |
|||
| Emergency stop switch | Located on controller | |||
| Ambient temperature | 0 to +40 ℃ +32 to +104 ℉ (Storage: -10 to +60 ℃ +14 to +140 ℉) (No dew condensation or icing allowed) |
|||
| Ambient humidity | 35 to 85 % RH (No dew condensation or icing allowed) | |||
| Net weight | Standard head | 20 kg | 16 kg | |
| Tower head | ||||
| Controller | 12 kg | 11 kg | ||
Notes:
1) Distance from target object varies by approx. ±2 mm ±0.079 in from model to model.
2) Varies by target object.
1) Distance from target object varies by approx. ±2 mm ±0.079 in from model to model.
2) Varies by target object.
Wide-area type
| Type | Wide-area type | ||
|---|---|---|---|
| Set model No. | Standard models | LP-435U | LP-425S9U |
| Tower head models | LP-435TU | LP-425S9TU | |
| Marking laser | Class 4 CO2 laser | ||
| Average output | 30 W | 20 W | |
| Wavelength | 10.6 μm 0.417 mil | 9.3 μm 0.366 mil | |
| Guide laser / pointer | Class 2 semiconductor laser; wavelength: 655 nm 0.026 mil | ||
| Marking range | 160 x 160 mm 6.3 x 6.3 in | ||
| Distance from target object (Note 1) | 262 mm 10.3 in | ||
| Scanning speed | Max. 12,000 mm/sec. | ||
| Line speed (Note 2) | 240 m/min. or less | ||
| Marking setting (character height, width) | 0.2 to 160 mm 0.008 to 6.3 in (variable in 0.001 mm 0.00004 in steps) |
||
| Marking spacing (character spacing, line pitch) |
0 to 160 mm 0 to 6.3 in (variable in 0.001 mm 0.00004 in steps) Arced output: -180° to +180° (variable in 0.01° steps) Arced output: -180° to +180° (variable in 0.01° steps) |
||
| Character arrays | Linear, proportional, monospaced, arced | ||
| Character types | English uppercase letters, english lowercase letters, numerals, katakana, hiragana, kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50) | ||
| Barcodes | Code 39, Code 128, ITF, NW-7, JAN / UPC, RSS-14 (GS1 DataBar), RSS (GS1 DataBar) Limited, RSS (GS1 DataBar) Expanded | ||
| 2D codes | QR Code, Micro QR Code, Data Matrix | ||
| Composite codes | RSS-14 (GS1 DataBar) CC-A, RSS-14 (GS1 DataBar) Stacked CC-A, RSS (GS1 DataBar) Limited CC-A, etc. | ||
| Logos / Graphics | BMP, DXF, HPGL, JPEG | ||
| Cooling method | Forced air cooling | ||
| Power voltage | 100 to 120 V AC ± 10 %, or 200 to 240 V AC ± 10 % (automatic switching), 50 / 60 Hz |
||
| Power consumption | 100 V AC | 1,000 VA or less | |
| 200 V AC | 1,200 VA or less | ||
| Inputs | Remote, trigger, encoder (A), encoder (B), shutter control, laser excitation, alarm reset, emergency stop, laser stop, etc. | ||
| Outputs | Power supply (+12 V), remote, marking ready, marking, marking complete, laser excitation, warning, alarm, configuration complete, counter complete | ||
| Marking state | Still, moving | ||
| Functions | ・Marking order optimization ・Intersection correction ・Counter marking ・Current date marking ・Deadline date marking ・Lot marking ・Logo data marking ・Font creation and editing ・Monospaced alignment ・Updating of operating screen display ・System offset ・Shared character settings ・Guide laser ・Dual pointers ・Focus adjustment ・Overlapping marking ・Backup ・Marking on long moving objects ・Font selection ・Bold marking ・Proportional marking ・Marking image display ・Marking time measurement ・Target object image display ・Operator adjustment ・Rank marking ・Offset marking ・Time hold ・Step and repeat ・I/O check monitor ・I/O simulation ・Error log display ・Serial data marking ・Power and speed configuration by row or logo file |
||
| Emergency stop switch | Located on controller | ||
| Ambient temperature | 0 to +40 ℃ +32 to +104 ℉ (Storage: -10 to +60 ℃ +14 to +140 ℉) (No dew condensation or icing allowed) |
||
| Ambient humidity | 35 to 85 % RH (No dew condensation or icing allowed) | ||
| Net weight | Standard head | 20 kg | |
| Tower head | |||
| Controller | 12 kg | ||
Notes:
1) Distance from target object varies by approx. ±2 mm ±0.079 in from model to model.
2) Varies by target object.
Conforming types
| Type | Japanese model | FDA regulations conforming type | CE marking conforming type |
|
|---|---|---|---|---|
| General-purpose type | Standard model | LP-430U | LP-430U-A | LP-430U-C |
| LP-420S9U | LP-420S9U-A | LP-420S9U-C | ||
| LP-410U | LP-410U-A | LP-410U-C | ||
| Tower head model | LP-430TU | LP-430TU-A | LP-430TU-C | |
| LP-420S9TU | LP-420S9TU-A | LP-420S9TU-C | ||
| LP-410TU | LP-410TU-A | LP-410TU-C | ||
| Small-spot type | Standard model | LP-431U | LP-431U-A | LP-431U-C |
| LP-421S9U | LP-421S9U-A | LP-421S9U-C | ||
| LP-411U | LP-411U-A | LP-411U-C | ||
| Tower head model | LP-431TU | LP-431TU-A | LP-431TU-C | |
| LP-421S9TU | LP-421S9TU-A | LP-421S9TU-C | ||
| LP-411TU | LP-411TU-A | LP-411TU-C | ||
| Wide-area type | Standard model | LP-435U | LP-435U-A | LP-435U-C |
| LP-425S9U | LP-425S9U-A | LP-425S9U-C | ||
| Tower head model | LP-435TU | LP-435TU-A | LP-435TU-C | |
| LP-425S9TU | LP-425S9TU-A | LP-425S9TU-C | ||
PRECAUTIONS FOR PROPER USE
- This product is classified as a Class 4 Laser Product in IEC / JIS standards and a Class IV Laser Product in FDA regulations 21 CFR 1040.10. Never look at or touch the direct laser beam and its reflection.
- The laser used by this product generates infrared light that is invisible to the human eye. Use particular caution when the laser is operating.
- The following labels are attached to this product. Handle the product according to the instruction given on the warning labels.
(Warning labels are not shown in the product photographs in this catalog.
