PV310 Machine Vision Specifications
Specifications for this product appear below.
General Specifications
Controller: ANPV0310***
| Item | Specification |
|---|---|
| Rated Operating Voltage | 24V DC |
| Operating Voltage Range | 21.6 to 26.4V DC(including ripples) |
| Rated Current Consumption | 0.7A max.(1 camera) 0.9A max.(1 camera) |
| Ambient Temperature (in use) | 0 to 50°C(no freezing or condensation) |
| Storage Ambient Temperature | -20 to ＋60°C(no freezing or condensation) |
| Ambient Humidity (in use and storage) | 35 to 75%RH(at 25°C with no freezing or condensation) |
| Noise Immunity | 1000 V pulse width 50 ns/1 μs(using noise simulator method) |
| Vibration Resistance | 10 to 55 Hz, 1 cycle/1 min. Double amplitude of 0.75 mm. 30 min. each in X, Y and Z directions |
| Shock Resistance | 196 m/s2, 5 times each in X, Y and Z directions |
| Weight | Approx. 450g |
| Dimensions (mm) | W59 × H130 × D100 (with connector 110) |
Camera Switching Unit: ANPV3700
| Item | Specification | |
|---|---|---|
| Functions | Camera Switching | 2-camera input - 1-camera output (Switching by external signal input/Manual switching) |
| Camera Image Split ANM832 (CE) only | 2-camera input - 1-camera output of top/bottom split images/ 2-camera input - 1-camera output of left/right split images | |
| External Switching Signal Input | 1 input, photo-coupler bidirectional input supported, 5 to 24 V DC | |
| DIP Switch Setting | LOCAL/REMOTE、NOMAL/DIV、A/B、Top-Bottom/Left-Right | |
| Rated Voltage Range | 12V DC(supplied from the MICROIMAGECHECKER unit) | |
| Weight | Approx. 150 g (Main unit only) | |
Notes:
1) Included items: 1 connection cable (30 cm), 2 ferrite cores, and 1 installation manual
2) The operation condition requirements are the same as those for the PV310 Controller.
Functional Specifications
Functional Specifications
| Item | Specification | |
|---|---|---|
| Settings Data Storage Capacity | Approx. 4 MB | |
| Frame Memory | 512×480(pixels) | |
| Operation Environment | Menu selection by dedicated keypad Key Emulation Menu selection by serial command | |
| Input/Output | Cameras | 2 Standard cameras, double-speed random cameras, or ultra-compact cameras (max. 4 cameras when using camera switching unit, excluding ultra-compact camera) |
| Monitor Output | Color VGA ouput | |
| Memory Card | Compact Flash: 1 slot | |
| Serial | RS-232C×1 | |
| Parallel | Input: 13 points; output: 14 points; removable screw-down terminal block | |
| Keypad Input | 1 Connector for dedicated keypad (ANM8520*) | |
| Tools | Ethernet: 1 channel | |
Image Processing Functional Specifications
| Item | Specification | |
|---|---|---|
| Monitor Display | Full color VGA/gray scale image/binary image Two-screen compressed display: side-by-side display (when gray scale image selected) through/memory, data monitor, marker, + information display region (128x480) |
|
| Number of Connected Cameras | Max. 2 cameras (Max. 4 cameras using camera switching unit, excluding ultra compact camera) | |
| Processing Method | Gray scale processing - Binary processing | |
| No. of Product Types | Max. 64 types(depends on settings data capacity) | |
| Inspection Functions | Max. 99 checkers/product type Position adjustment,rotation adjustment,binary window Gray scale window,binary edge,gray scale edge Feature extraction,smart matching,contour matching,scratch detection |
|
| Numerical Computation | Max. 96 functions/product type Operators: 4-operation calculation, ,√,arc tangent,distance between 2 points,parenthesis, sin, cos, absolute value of difference |
|
| Judgment Output | Max. 96 functions/product type Operators: NOT/AND/OR/XOR/parenthesis |
|
| Statistics | Max. 96/product type Calculation of no. of passes/no. of fails/fails/pass average/pass distribution/pass max. value/pass min. value/pass range(for judgment output no. of passes/no. of fails only) |
|
| Data Monitor | Max. 50/product type Displayed on screen in table form during RUN Title input and substitution of numerical computation results, judgment output results, statistical results and product numbers possible |
|
| Operation Data | Max. 4/environment Substitution in numerical computation possible |
|
| Marker | Max. 8/product type Graphic display on screen during RUN |
|
| External Input/Output | Serial | RS-232C＝1ch(max. speed 115200bps) |
| Input: start/product type switch/camera display switch/template re-registration/CompactFlash settings restore/reference to and alteration of upper and lower values for numerical computation/reference to and alteration of binary level/reference to and alteration of gray scale edge thresholds/data storage/fixed length input for input commands for statistics initialization (for PLC) Output: output (no. of inspections/judgment output/numerical computations/statistics) synchronous or asynchronous to inspection start trigger Computer link support: Supported models: Panasonic Electric Works PLC OMRON Corporation - C, CV and CS1 series Mitsubishi Electric Corporation - A, Q and FX series Rockwell Automation DF1 protocol Fuji Electric SX series |
||
| Parallel | Input: 13 points; output: 14 points Input: start/product type switch/camera display switch/template re-registration/data restore from Compact Flash Output: ready/error/flush/image acquired/strobe/judgment output data/synchronous output (no. of inspections/judgment output/numerical computation/statistics) possible by handshake output |
|
| Ethernet(1 channel) | Output: no. of inspections/judgment output/numerical computations/statistics/ settings data/image backup and restore/conversion to documentation for settings data (Vision AXTOOL) | |
| CF Card(1 slot) | Output: no. of inspections/judgment output/numerical computations/statistics/ settings data/image backup and restore/screen dumps | |
| Other | Display Functions | Transparent menu/parallel output status monitor/reference coordinate display/checkers with fail results highlighted in different color |
| Collective Movement | Collective movement of set checkers in units of position/rotation adjustment groups | |
| Image Storage | Max. 16 images/camera Each time/storage possible according to judgment result Test runs available on stored images Display of date and time saved Function to maintain display of last image saved | |
| Setting Help | Focusing/aperture adjustment/parallel monitor/lighting adjustment/gray scale profile display | |
| Calendar | Calendar information added to stored images File time stamp | |
| Password | Password function for when moving between settings modes | |
