LC4H Counters Dimensions

• 
• 
• 
• 

• Overview
• Part Numbers
• Specifications
• Dimensions

Dimensions/model drawings for this product appear below. Units are usually notated in millimeters (mm) and in inches (in) (if provided).

• Download LC4H series dimensions in PDF format.
• Find 2D/3D CAD drawings and more for LC4H series.

LC4H Counters

4-digit display type

General tolerance :	±1.0mm
	±0.39in

6-digit display type

Dimensions for flush mounting (with adapter installed)

Dimensions for front panel installations

Installation panel cut-out dimensions

The standard panel cut-out dimensions are shown below. Use the mounting frame (AT8-DA4) and rubber gasket (ATC18002).

For connected installations

Note 1:	The installation panel thickness should be between 1 and 5 mm/ .039 and .197 inch.
Note 2:	For connected installations, the waterproofing ability between the unit and installation panel is lost.

^ Back to top

LC4H-S Counters

Dimensions for flush mounting (with adapter installed)

General tolerance :	±1.0mm
	±0.39in

Dimensions for front panel installations

Installation panel cut-out dimensions

The standard panel cut-out dimensions are shown below.
Use the mounting frame (AT8-DA4) and rubber gasket (ATC18002).

For connected installations

Note 1:	The installation panel thickness should be between 1 and 5 mm .039 and .197 inch.
Note 2:	For connected installations, the waterproofing ability between the unit and installation panel is lost.

^ Back to top

LC4H-L Counters

4-digit display type

General tolerance :	±1.0mm
	±0.39in

6-digit display type

Dimensions for flush mounting (with adapter installed)

Dimensions for front panel installations

Installation panel cut-out dimensions

The standard panel cut-out dimensions are shown below. Use the mounting frame (AT8-DA4) and rubber gasket (ATC18002).

For connected installations

Note 1:	The installation panel thickness should be between 1 and 5 mm/ .039 and .197 inch.
Note 2:	For connected installations, the waterproofing ability between the unit and installation panel is lost.

^ Back to top

LC4H-W Counters

LC4H-W electrical counter

General tolerance :	±1.0mm
	±0.39in

Dimensions for embedded installation (with adapter installed)

Dimensions for front panel installations

Installation panel cut-out dimensions

The standard panel cut-out dimensions are shown below. Use the installation frame (ATA4811) and rubber gasket (ATC18002).

For connected installations

*1	The installation panel thickness should be between 1 and 5 mm/ .039 and .197 inch.
*2	For connected installations, the waterproofing ability between the unit and installation panel is lost.

^ Back to top